rear hatch lock motor

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 1, 2007
Threads
86
Messages
904
Location
Erie, Co
My rear hatch is not unlocking/locking with my electric switches. I've read threads covering most of the issues, from needing to grease it, pulling the black pin up, and making sure the arm next to the motor is attached correctly. Everything is looking good on my truck, it just looks like the motor isn't strong enough to spin the gear to unlock the hatch, but all the mechanicals are very easy to move.

The motor spins the gear fine in the free direction, but when making the change to the other direction (lock from unlock or unlock from locked), it hardly spins the gear.

Does anyone know if that motor is a replaceable part?
 
Sorry, I don't know about replacements, but cleaning the motor's brushes and commutator worked great for my passenger door.

Door Lock 02.webp

Door Lock 03.webp
 
Check arm from the motor as the splines inside are skipping because arm has cracked!
Pull apart and if lock motor cycles then you have a worn out or cracked part.
 
Arm is good if I'm looking at the same arm you are talking about. Not the arm of the actual motor pictured above, but the one that moves on the gear. anyway, all that stuff checks fine from what I can tell, moves fine by hand and if i move the gear myself all moves fine. Cleaned the brushes and commutator, still nothing. Makes me wish there was an 80 in my hood I could grab a motor from to verify that it is just a bad/weak motor somehow.

The motor does cycle when it is not attached to the gear, but when put back on it doesn't want to cycle, like it isn't strong enough to move the gear. That gear seems to have a pretty stout spring on it.
 
Last edited:
Back
Top Bottom