Rear Ding Ding Ding Ding

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 23, 2007
Threads
114
Messages
1,115
Location
Kennett Square, PA
Website
cruisin4parts.com
I have a very loud ding noise coming from my rear diff or rear driveshaft. I hear it the most when in reverse. I get like a ding ding ding ding dingding ding sound when backing up, coming from the rear. I can hear sometime when going forward, I hear it mostly when going 20 on my road.

What does that sound mean?
 
It means my wife finally won something on a slot machine.

I really have no idea but could'nt pass it up. Good luck

Buck Buchanan
 
Someone may have put a zip-tie around your driveshaft.

I'm serious.

A guy at work did that to me.
 
Someone may have put a zip-tie around your driveshaft.

I'm serious.

A guy at work did that to me.
I WISH that was the case. Nothing is touching the shafts, or zip tied on them. :p
 
You sure about that? I had to look under my truck a few times to figure out what was going on.
 
Yeah, before I posted this I was underneath my cruiser looking for something dinging the shafts and then I was watching someone drive my car back and forth trying to locate the dinging, ended up coming from the rear.
 
Yeah, before I posted this I was underneath my cruiser looking for something dinging the shafts and then I was watching someone drive my car back and forth trying to locate the dinging, ended up coming from the rear.

Is it a hollow ding, like when you hit the driveshaft with a hammer, or a solid ding (metallic dink, dink, dink)?
 
Last edited:
More troubleshooting ideas...

Does the "ding" increase with speed? If so, you've narrowed it to rotating/moving parts, i.e., driveshaft, rotors, wheels, brakes/e-brakes, axles. If it's not speed sensitive, or inconsistent, then it may be a loose muffler bracket, broken swaybar mount, something hitting the rear panhard, spare tire holder/chain, etc.
 
check your muffler. the mount may have bent it so it is just barely touching your ds in reverse or sometimes forward.
look for rub marks on the ds and yoke
 
check your muffler. the mount may have bent it so it is just barely touching your ds in reverse or sometimes forward.
look for rub marks on the ds and yoke

Same issue withg my 80, muffler was hitting driveshaft at random times, all the rubber blocks on the mounts were gone
 
Definitely has that driveshaft ding to it. But now that I think of it, a dink sound kinda sounds like it.

I'm almost positive when saying nothing is hitting it. The muffler and exhaust was just replaced. Nothing loose nearby. And I only really hear it when in reverse.

It increases with speed. Sometimes it'll skip. Instead of a constant ding ding ding, it'll go ding ding dingdingdingding ding ding. Could it be the little bearings in the u-joint? I'm replacing them Monday.

I even occasionaly get the same ding when putting the cruiser in reverse.
 
My drive shaft ding was a bad U-joint.
 
It now has a clicking noise to it. Put it in reverse, click. then at like 30 you hear like a bunch of clicking. Thin metal clicking sound almost. Changes with speed. Goes away when put into neutral. It appears and disappears constantly. Sometimes you can hear it. Then there are times you don't hear it for a whole trip.
 
When its not moving, no noise. Not moving and revving the engine, no noise. Its when the truck is moving and in gear.
 
stand back...she's gonna blow! No really, it sounds like a driveline issue related to u-joints...jmo

...check all your driveline connections from the tranny to the tailpipe
 
That's what I'm thinking. I'm hoping to get to them Monday. If not today, so I be back when I get them replaced. Thanks guys, let you know how it turns out.
 
I had the same exact problem. Was worsened by bacing up an incline. I greased the joints and all seems fine for now.
 
Back
Top Bottom