Rear Bumper: Different Needs

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 22, 2007
Threads
100
Messages
461
Location
Germantown MD
My rig is more than a dual purpose rig. It serves as the following not in any particular order:

-wheeler....well almost, it will have some armor soon
-mountain bike carrier and shuttle vehicle
-dirt bike carrier on a hitch rack (when it's just the dirt bike being hauled)
-dirt bike and atv hauler on a trailer
-camp/beach vehicle
-sometimes daily driver (I have a true, efficient daily driver but the truck is more fun)

So with all these needs I need to have access to the back when there are racks to carry bikes/dirtbike on the back.

One of the many things I love about my 80 is the hatch and tailgate design that allows easy access to anything in the back. I really don't want to lose that.

I also hate having to take the spare tire out of the stock location and putting it in the rear when I wheel. I don't really want to carry the spare on the roof because I have long drives to trails for wheeling/MTB/dirtbikes.

Lastly, with all the eqiupment I have to haul when riding bikes, dirtbikes, atvs, etc. I don't want to have the spare in the rear taking up valuable hauling space.

So my requirements are;

-keep access to the back
-move spare from stock location
-keep spare off roof
-keep spare out of rear compartment

I started brainstorming and I thought about a rear bumper with a slide system so I could still access the rear with the dirt bike and bikes on the back. This is what I came up with.

Closed:

rear%20bumper%20closed.JPG


Open:

rear%20bumper%20open.JPG


Rear Rack with bike:

rear%20bumper%20with%20rack%20005.jpg


Rack folded....I would have to add an extension

rear%20bumper%20with%20rack%20002.jpg


The I can access the rear with the bike in place, the hatch does hit the handle bars but there is still plenty of room the access. The rack actually fold downward for when I need to take bigger items in and out. With all that versatility from the rack, I would hate to put on a swing out that would require I take all the bikes off for full access to the rear.

Has anyone ever seen anything like this? What would the downfalls be? Could I even find a slide strong enough, that would somehow be sealed to keep water out? Please critique.
 
Doesn't leave much space to either side of you to open the back. You would need to always plan to park in a spot that would allow room for it to slide to the side. Otherwise it seems like a decent idea. I just don't like the idea of losing access to the back if someone parks a little too close to me while I am in the store, on the trail, etc.
 
I have the same issue

I found a rack that attaches to the wheel and swings out of the way with 2 bikes on it. The rack is made by Bauer. It's not ideal but has proven to be pretty secure. I'm wondering if you design a swingout that could have a hitch receiver in it that would be able to support the weight of a fold out rack like yours and 2 bikes?

Keep me posted on what you come up with.
cheers,
David...
Gooseberry Mesa (21).webp
 
Interesting...







won't work...







too ingenious... :D
 
Innovative!

I like the thinking outside the box + you could design it to slide either direction - PS or DS!
 
It would be really slick if you had the slide design incorporated in a swing out mount. That way, choice is yours on how you access the back. I think the swing out is necessary for parking lots when you may not be able to slide to the side because of being blocked by the car in the next spot.

Good luck, and I'm subscribed to the thread to see the results.

-KK
 
Wow, Silvercruiser, that is a great looking truck with some nice specs!!!! 4.88's and a hair dryer, that thing must actually move!!!!

The issue with the bike carrier that attaches to the spare is that it only holds 2 bikes. My pimptastic Thule rack holds 4 downhill bikes easily and effortlessly. No having to climb to the roof to take bikes down during shuttle runs.

I think my 1st step will be to source a slide that meets my needs. Once I do that I can model it in something a little more advanced that Google sketchup. Once I do that I will let it sit and continue to move my spare from under the truck to the rear for wheeling while I play the lottery and try to win big.
 
The problem I see is that the slide will have to be able to handle the leverage of a heavy tire when extended while still being able to slide. Plus, if you whack that bumper offroad you might get just enough misalignment in the slide to make it a nightmare to use.

Why not just get a swingout bike carrier? Or do like I do, put the spare on the roof with the bike rack that will drop down to allow access to the rear.

The reason I don't have a tire carrier is I hate the obstructed view and I hate having to swing those things out to use the hatch. Not sure what driving long distances has to do with putting the spare on a roof rack. I easily get 13-14 mpg with the tire up there and have not found it makes any difference (except when I really want to use the rack, of couse :hillbilly:
 
If you are willing to modify the 4 bike carrier you already have, why don't you add a 2" receiver to the center of the tire for a conventional swingout? My tire sits to the passenger side, but when I built the tire carrier portion, I added a 2" receiver that sticks out through the center of the wheel.

It serves two purposes, one is when you are lifting a heavy 315 tire, you don't have to worry about hitting the studs on the first try. Just get it onto the receiver portion, rotate to line up the studs and make the final little lift onto the studs, cinch it down and you are done.

Second, I built a shovel and trash bag carrier that slides into the receiver and uses a regular hitch pin to secure it. The beauty is that it is totally modular. Whatever you want to build to fit, can be used (within reason for weight of course).

Just an idea...

Jack
 
What about a dual swing out bumper. One for the tire and one for the bikes.

Buck
 
Its a unique idea. One of the probs I see would be getting dirt and stuff in the "track". Causing it to bind up or make it very difficult to slide. Might be high maintenance compared to a swing out. Nice job on thinking outside the box!
 
JMVAR,
Let me know when you get to the next step in your design. I plan on working with one of the bumper designers to see what he comes up with. Do you have an ARB on the front? What about putting a hitch receiver up there?

Jack...I like your idea. Do you have pics?
thanks,
David...
 
have seen them here gas strutted from the hitch so they fold down, and the wheel swings out.

By the time its folded down, when its up high to 4wd with the bikes on the back, you have enough room to step between the bikes and and tailgate.

It uses a hitch pin to lock it in the up position.
 
If you are willing to modify the 4 bike carrier you already have, why don't you add a 2" receiver to the center of the tire for a conventional swingout? My tire sits to the passenger side, but when I built the tire carrier portion, I added a 2" receiver that sticks out through the center of the wheel.

It serves two purposes, one is when you are lifting a heavy 315 tire, you don't have to worry about hitting the studs on the first try. Just get it onto the receiver portion, rotate to line up the studs and make the final little lift onto the studs, cinch it down and you are done.

Second, I built a shovel and trash bag carrier that slides into the receiver and uses a regular hitch pin to secure it. The beauty is that it is totally modular. Whatever you want to build to fit, can be used (within reason for weight of course).

Just an idea...

Jack

I did the same thing a few years ago on a bumper build I did for my last truck, worked great. When you swung the tire carrier the bikes would automatically swing out the the way also, don't know why every bumper isn't designed that way.
 
The biggest issue I see with attaching the rack to the actual swing out is the weight of 4 downhill bikes on the spindle and carrier. Some of these bikes are pushing north of 45 lbs. Add to that the length of the rack and the moment on attachment point gets to be pretty hefty.

I think that a short term solution for me will be putting the spare on the roof. I really need to get rid of the factory rack anyways because i have a feeling there is some rust going on up there even though I don't see any.

This will resolve my issue with wheeling with the spare in the stock location and save room for camping equipment. I will see if it kills my gas mileage...even though it can't get much worse. Anyone have any experience with this besides Nay? His rig is set up much differently from mine. I have the feeling once you put your tire up there, you really aren't measuring MPG.
 
if you have a folding rack, admittedly a bit unwieldy with bikes on it, could you not open a swingout tire mount when the rack is folded down?


I must say, though, that even without a bike rack, the tire swing out opening needed each time I need to get in the truck is getting old pretty fast...
 
Back
Top Bottom