Rear axle bearing change

[kcjaz]

@bloc did you ever put together a parts list for the rear bearings? Here is what I’ve come up with for an order (both sides):

Description	Part #	Quantity
RH Bearing assembly	42450-60070	1
LH Bearing assembly	42460-60030	1
Snap ring	90520-46014	2
Retainer	42423-34040	2
Conical washer	90208-49001	2
Oil seal	90310-63001	2
O-ring	90301-88004	2
Bearing axle bolt	90114-12044	8
Bearing axle nut	94151-21201	8

Reading through your write up, this seems more difficult than doing the front.

 

[bloc]

@bloc did you ever put together a parts list for the rear bearings? Here is what I’ve come up with for an order (both sides):

Description	Part #	Quantity
RH Bearing assembly	42450-60070	1
LH Bearing assembly	42460-60030	1
Snap ring	90520-46014	2
Retainer	42423-34040	2
Conical washer	90208-49001	2
Oil seal	90310-63001	2
O-ring	90301-88004	2
Bearing axle bolt	90114-12044	8
Bearing axle nut	94151-21201	8

Reading through your write up, this seems more difficult than doing the front.

I would add 2x 92112-C0616 ABS sensor stud and 2x 94150-10641 ABS sensor nuts, especially if you have any corrosion. If we could source the ABS sensor o-rings I'd throw those in but they aren't listed separately..

Otherwise your list looks good. And yes this is more difficult than the fronts, IMO. As it is you'll need a pretty solid press to even move the old bearing and retainer off the axle.. that thing is very solidly on there.

 

[kcjaz]

I would add 2x 92112-C0616 ABS sensor stud and 2x 94150-10641 ABS sensor nuts, especially if you have any corrosion. If we could source the ABS sensor o-rings I'd throw those in but they aren't listed separately..

Otherwise your list looks good. And yes this is more difficult than the fronts, IMO. As it is you'll need a pretty solid press to even move the old bearing and retainer off the axle.. that thing is very solidly on there.

Those numbers don’t pull up on the Serra site. Mind double checking?

 

[bloc]

Those numbers don’t pull up on the Serra site. Mind double checking?

That's an annoying quirk of the parts systems. What I listed were the numbers from the original toyota diagrams, but for some reason a bunch of the sites can't appropriately cross-reference them to their newer superceded numbers. Other sites (like my local one) do.. it's weird.

Studs: 90116-A0014
Nuts: 94150-10641

 

[kcjaz]

Revised table for reference.

Description	Part #	Quantity
RH Bearing assembly	42450-60070	1
LH Bearing assembly	42460-60030	1
Snap ring	90520-46014	2
Retainer	42423-34040	2
Conical washer	90208-49001	2
Oil seal	90310-63001	2
O-ring	90301-88004	2
Bearing axle bolt	90114-12044	8
Bearing axle nut	94151-21201	8
ABS sensor stud	90116-A0014	2
ABS sensor nut	94160-10641	2