Real time help: flashers work but not turn signals...

[jdog35]

As the title states. I swapped LEDs into the rearend, and my flashers work fine, but not the turn signals. Thoughts?

 

[Pighead]

Thoughts...

Did you do any research into LEDs?
Don't they need a special flasher, or a special thingy to make your stock flasher work?
Have you tried "search"?

 

[flaa1a]

You need a special flasher to make the LEDs work with your blinkers.

 

[jdog35]

Thanks guys. Sorry. Should have prefaced with my other threads.

Yes on both fronts. Did the research, bought the electronic flasher, and still no go.

Just not sure what the missing link is here. If the flashers go but not the turns that leads me to believe something is goofed in the turn signal switch. Or am i crazy?

 

[Pighead]

Sometimes, it's still a bad ground...

 

[jdog35]

Ahhh pighead...the pig budda.

Would a bad ground still allow the hazards to work though?

 

[wct49]

Did you resolve this issue and how? I replace bulbs with LEDs and no blinkie now...

 

[LAMBCRUSHER]

soory to be obvious, but did you check the fuse?

 

[Gumby]

Did you resolve this issue and how? I replace bulbs with LEDs and no blinkie now...

You might need a different flasher. The flasher needs resistance to work. LEDs have less resistance than filament bulbs.

 

[wct49]

soory to be obvious, but did you check the fuse?

We have light just no blinkie

You might need a different flasher. The flasher needs resistance to work. LEDs have less resistance than filament bulbs.

sounds about right....