question on fan clutch mod...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 1, 2006
Threads
211
Messages
1,010
Location
Dallas, TX
question:
humm.... I switched to 10k by draining the clutch and adding 2 packs of the 10k oil. I also rotated the plate as instructed here (counterclockwise).... Is it possible that my vent temps could have gone up due to this? I was thinking about resetting the plate to the original position to test ....

I did everything exactly per instructions but do not notice any cooling affect, in fact it seems warmer.....

I did hammer the hell out of the clutch to jar the screws lose....
 
I never adjusted the plate on mine, and it seems to work way better after adding 20K oil.
 
How hard is/was this? I'm going to have one to mess around with in a couple weeks.

DougM
 
How hard is/was this? I'm going to have one to mess around with in a couple weeks.

DougM

If you have an impact screwdriver with a #3 bit its actually pretty easy (now that I know). The clutch comes off very easily without removing the shroud. The oil removal is just a waiting game :D
 
I now place the base of the clutch in a 200* oven to help loosen the oil for draining.

I'm now using XRay diff lock fluid. It comes in a 35ml bottle and is just right for one clutch if that clutch has been completely drained.

I also came up with a setting procedure for people to evaluate their clutches timing. Randomly rotating the plate will obviously give random results and not allow you to determine what is going on.
 
Can you elaborate on the new setting proceedure Rick?
 
was there something new in the pdf instructions? seems to be the same as before? No info on an oven...?
 
Back
Top Bottom