Question about bushings?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 4, 2006
Threads
2
Messages
102
Location
Central MN & TN
This may seem like a stupid question :doh: but, I am putting on the OME springs and would like to change out all the bushings! I know about all the bushings needed from slee website. My ? happens to be my cruiser has 105k is it necessary to change the bushings or just leave well enough alone.

thanks for any and all input

kunal
 
That said is it something I can do myself very easily or better let a pro take care of it. I am not saying that I am not mechanicaly inclined just don't have all the specific tools needed! And plus the time needed. :cheers:
 
stock rubber bushings are better than anything aftermarket. Keep them in unless they are damaged. I doubt there is anything wrong with them w/ so little mileage.

You need a big press to push out/push in the caster correction bushings. So that must be done by a shop or someone w/ access to a press.
 
FirstToy, I think time is the majority of the reason for breakdown and wear for rubber bushings, so the 11 years means more IMO than the 100k miles. Either way, you're good to go for a while, but if you have someone with a press that cna do it, and you feel like buying new ones, go OEM from CDan and be happy you have some spares.
 
stock rubber bushings are better than anything aftermarket. Keep them in unless they are damaged. I doubt there is anything wrong with them w/ so little mileage.

You need a big press to push out/push in the caster correction bushings. So that must be done by a shop or someone w/ access to a press.

Thanks alot so have to take it to a dealer to put the caster bushings on with the OME springs.

thanks alot
kunal :cheers:
 
If you plan on twisting up the suspension a lot, the new bushings would probably help. If not, you'd probably be wasting your money. They may be a little stiffer than new bushings, but they'll do the job they're made for if you're not looking for every last inch of flex available.

-Spike
 
If you plan on twisting up the suspension a lot, the new bushings would probably help. If not, you'd probably be wasting your money. They may be a little stiffer than new bushings, but they'll do the job they're made for if you're not looking for every last inch of flex available.

-Spike

thanks for your input much appreciated! :)
 
Back
Top Bottom