Prado/ GX470 ARB Bumper
- Thread starter lexwoody
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
lexwoody,
It does not sound like a bad deal. I would check some local fabricators and see if they could build something custom. You will need to make some mods to get it to fit properly. I think the front end is a little different.
TexGX
It does not sound like a bad deal. I would check some local fabricators and see if they could build something custom. You will need to make some mods to get it to fit properly. I think the front end is a little different.
TexGX
Do you have a local fabricator that can adapt the bumper for the GX? AFAIK the Prado bumper will not be a bolt on for the GX, and will require quite a bit of work to make it fit. Just FYI.
I think that style wouod look better on the 4R as well. The current ARB for the 4R looks as if it's leaning a little forward due to the way the headlight sweep back to the hood.
Did you find that in OZ?
Did you find that in OZ?
- Thread starter
- #6
Called ARB and it's a direct fit. The come with or without fender flares. Item no. 3421110
$1075.42 http://www.polyperformance.com/shop...ruiser-Prado-02-03-ON-120-SERIES-p-18527.html
$977.65 http://www.alljproductsonline.com/index.php?main_page=product_info&cPath=65_120&products_id=973
$1075.42 http://www.polyperformance.com/shop...ruiser-Prado-02-03-ON-120-SERIES-p-18527.html
$977.65 http://www.alljproductsonline.com/index.php?main_page=product_info&cPath=65_120&products_id=973
Last edited:
Let us know how it pans out.
My understanding was that it will require quite a bit of work to make it fit on the GX (trimming, bracket modifications, etc).
My understanding was that it will require quite a bit of work to make it fit on the GX (trimming, bracket modifications, etc).
Dude i want this bar so badly. Post pics after you put it on! Ive been working on my "trail lex" too. What did you do for the rear suspension? I relocated my rideheight sensors to gain an extra few inches in the back but id rather do a coil-spring conversion. Do you know of anyone who has done it yet?
- Thread starter
- #9
Dude i want this bar so badly. Post pics after you put it on! Ive been working on my "trail lex" too. What did you do for the rear suspension? I relocated my rideheight sensors to gain an extra few inches in the back but id rather do a coil-spring conversion. Do you know of anyone who has done it yet?
Nothing yet to the suspension. I going to do a 2.5 Daystars and adjust the rear height sensor 1 or 1.5 inches.
You look like your in HI. what island are you on. I have a GX470. I want to know how you did that lift, tires. I like that look!!Dude i want this bar so badly. Post pics after you put it on! Ive been working on my "trail lex" too. What did you do for the rear suspension? I relocated my rideheight sensors to gain an extra few inches in the back but id rather do a coil-spring conversion. Do you know of anyone who has done it yet?
- Thread starter
- #13
Theoverachiever, Are you still around?
I am building a GX and your truck is one of my inspirations. Would like to ask you a few questions.
Here is my build over at 120...
Starting my GX470 build! - Toyota 120 Platforms Forum
B-
I am building a GX and your truck is one of my inspirations. Would like to ask you a few questions.
Here is my build over at 120...
Starting my GX470 build! - Toyota 120 Platforms Forum
B-