powertrax up front

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 5, 2005
Threads
31
Messages
120
Location
arkansas
Someone told me that with a powertrax (autolocker) up front could cause some major problems with the transmission in reverse. How could an auto locker up front cause breakage of driveshafts and/or pinions when under load (such as off-roading) when in reverse? Also, is there an extra part I will need in order to put an arb air locker in a semi-floating rear that has been in a full-floating front? Thanks in advance

KC Hargis
 
I have been running a powertrax in my front end for over 6 years and have had no problems caused by it. You do have to watch out when backing up in 4wd with the wheels turned as this is almost a sure way to bust a birfield.

Sorry I can't help you with the ARB quesiton.
 
Spoke to the guys at Aussie Locker. They recommend that the front wheels should be unlocked on icy/slick conditions. Don't know if this applies to the Powertrax, though.
 
kchargis said:
Someone told me... [snip] How could an auto locker up front cause breakage of driveshafts and/or pinions when under load (such as off-roading) when in reverse?

Maybe they were referring to the fact that when you reverse (especially up a hill), vehicle weight is transferred more to the front axle and this leads to higher traction... which leads to "more" strain (mostly on the steering joints w/ the wheels turned as mentioned), but this shouldn't be a problem... plenty of people run 'em.
 
So basically this will not be a problem....I should just lay off the gas in 4x reverse with tires turned. I have decided to put the arb in the rear for better on-road performance. Do you guys think this was a good move?
 
kchargis said:
So basically this will not be a problem....I should just lay off the gas in 4x reverse with tires turned. I have decided to put the arb in the rear for better on-road performance. Do you guys think this was a good move?

An ARB is an excellent locker, but a locker in the rear just dosn't bother me on road. I have a Detroit in the rear.


If your going to be set up for ARB you might as well put one up front also.


Just my .02


my64fj40
 
I run a EZ locker up front and an ARB in the rear for road manners.

I did just break a longfield, but I was goosing it with a decent amount of gearing and fairly large tire.

It works fine, but I am definatly throwin another ARB in the front as soon as I have the cash. The constant strain on the steering when in 4wd is not great.
 
I have just the opposite, lockrite in the rear an ARB up front. Other than a clicking sound while making tight turns on asphalt I haven't seen any problems with the lockrite in the rear and I have always insisted on a selectable locker in the front. Call me strange, it's just my opinion.
 
Back
Top Bottom