Power Steering Reservoir

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 24, 2014
Threads
41
Messages
179
Location
Seattle, Washington
Simple question here...which hose on the reservoir is the "reservoir to pump" as in the pump draws from rez.
I want to flush/cycle new ATF thru my power steering system. Its not looking red anymore but its not quite brown yet...rather somewhere in between.

Thank you in advance.
 
The one from the bottom. The one in the side is the return.
 
It's probably easiest to disconnect the Ø10-mm hose from the oil cooler (the one that ends at the reservoir) and connect a thinwalled Ø3/8 x 12-inch long hose in its place. They will both hang near the steering damper. That way, you'll be able to flush the fluid from the entire system without making a mess.

If your hoses are like mine, they will crack and break at the tubing. A Ø3/8-in power steering hose is your only replacement option if this happens. The hoses to the cooler (connected to the reservoir and gearbox) aren't available separately (that I know of) - they are part of the cooler assembly.
 
... Its not looking red anymore but its not quite brown yet...rather somewhere in between.
...

Maybe the original fluid, clear/tan-ish, hydraulic fluid?
 
I'm using MaxLife ATF in my PS system, which I'm very happy with. It works well and quietly. I also rebuilt the PS pump, which was kind of a PITA. I'm not sure I'd recommend doing that, but then again a lot of Mudders have complained about crappy reman PS pumps. I got a high quality Japanese bearing for something like ten bucks on eBay, and used the Gates rebuild kit. My PS pump works great now, doesn't leak, and is silent.
 
The owner's manual and FSM specify Dextron Type II, which isn't available (near me anyway) any more. The local dealership has been using Dextron Type IV.

You could use hydraulic fluid, if you had it. I wouldn't use GM or Ford fluids; they're full of anti-foaming and live extending agents you don't need.
 
The owner's manual and FSM specify Dextron Type II, which isn't available (near me anyway) any more. The local dealership has been using Dextron Type IV.

You could use hydraulic fluid, if you had it. I wouldn't use GM or Ford fluids; they're full of anti-foaming and live extending agents you don't need.
Like all fluids, later specs are compatible with earlier versions.
 
... I wouldn't use GM or Ford fluids; they're full of anti-foaming and live extending agents you don't need.

All of that type of fluids, including ATF have anti-foam, anti-wear, etc, needed. ATF has the most unnecessary stuff, hydraulic/PS fluids are cleaner. The old school PS fluid works, is basically hydraulic fluid, depending on brand, maybe not the best grade? Any of it will work. In our experience, ATF is the poorest performer, most likely to cause cavitation, leave varnish, PS fluid works better, Mobil DTE light performs best.
 
Mobil DTE
All of that type of fluids, including ATF have anti-foam, anti-wear, etc, needed. ATF has the most unnecessary stuff, hydraulic/PS fluids are cleaner. The old school PS fluid works, is basically hydraulic fluid, depending on brand, maybe not the best grade? Any of it will work. In our experience, ATF is the poorest performer, most likely to cause cavitation, leave varnish, PS fluid works better, Mobil DTE light performs best.

Which DTE are you suggesting, Tools? It looks like there are a number of them, Heavy, 24, etc. I've never heard of it, so forgive my ignorance.
 
Which DTE are you suggesting, Tools? It looks like there are a number of them, Heavy, 24, etc. I've never heard of it, so forgive my ignorance.

Mobil DTE Light, ISO 32, it's kinda hard to find in small amounts, we get it from machinist buddies.
 
Mobil DTE Light, ISO 32, it's kinda hard to find in small amounts, we get it from machinist buddies.

Thanks, Tools! Of course Tools has machinist buddies! :)
 
Back
Top Bottom