Power Steering pump

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 15, 2005
Threads
51
Messages
508
Location
Wisconsin
I was wondering if anyone has used the saginaw power steering pump that jtoutfitters sells right now i have a AMC eagle pump but with no pulley its a newer one thats been rebuilt but i cant seem to come across the pulley for it so i was seeing if anyone was using the one from jtoutfitters (http://www.jtoutfitters.com/product...=3945&osCsid=928a6504333df1a273bc7642dd9dacac) thats the link it seems like it wouldnt be a bad idea cause then i can jsut get the bracket they sell to go with it... seems little spendy but its a land cruiser it eats my money thats why i love it! ;p
 
Part # 20-6000 @ napa is the standard saginaw pump that works with virtually all the aftermarket brackets.

It does not come with a pulley, you can use a keyed industrial pulley with a 5/8" bore and the proper belt width. Most industrial suppliers carry these (grainger, mcmaster etc)
 
What pulley would i ask for if i didnt go to napa cause i dont like napa at all! i use baxters napa where i live are a bunch of assholes sorry for the language but i really dont like them i have a standard pump right now that i pulled from the tech links but it didnt come with the pulley its a press on i can take a pic of it and post if you want thanks for all the feedback
 
I got my pulley from auto zoons


IMG_7692.jpg
 
Back
Top Bottom