PN for these hoses?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 8, 2017
Threads
8
Messages
28
Location
Susanville, CA
Been asking around, calling around, searching around, can't really find a part number for these hoses. any help you guys could provide would be greatly appreciated cuz I need to redo the cooling system. Thank you in advance
20171201_152830.webp
20171201_152835.webp
20171201_152844.webp
20171201_152933.webp
20171201_152902.webp
 
just use regular 5/8 cooling hose, i replaced them with the gates white stripe. others prefer the gates green stripe which is a heavy duty coolant hose and should be available at napa.

the breather and pcv hoses i forget what diameter the hose was but i uses generic hose that was rated for use with oil
 
I search will get you there. Look up the PN for heater valve too.
 
When you replace your heater hoses, think about replacing your heater control valve too. They have a bad habit of looking great on the outside, and rotting away from the inside. It never seems to fail, that when they do go bad, it never happens in your driveway, but always miles from home.
 
Yeah, the diagrams at toyodiy are helpful. all of the molded hoses are available. The straight ones, just use gates green stripe.

You should beware that (depending on the year of your truck) there are some bypass hoses that aren't in your photos, that may just as easily fail on you. i think regardless of obd1 or 2, there's one that goes from not far from the PHH to somewhere under the throttle body.
 
Back
Top Bottom