please help window stuck in door

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 30, 2008
Threads
24
Messages
106
Location
Battle Ground WA
the past few days my driver window has been acting up like its about to come off the tracks and when i went to roll it up last night it came up a quarter of the way and got stuck in a weird position it feels like the back of the window isnt't even connected to anything because i can move it up and down easily. Now the window is stuck in the door all the way down and if i try to roll it up it catches on the lower plastic molding at the bottom of the window. I am wondering if any one has had this problem and what needs to be fixed. any input would help.

Thnaks
 
I have not had this problem before, but it sounds like your window has come out of the track due to some kind of mechanical problem. Possibly one of two the bolts that attach the window to the regulator mechanism has come loose/out. You need an FSM to see how it works. You might try searching here on MUD for some tips. With another person as a helper to operate the switch, you might be able to guide the window to stay in the track and level, with your hands, using caution to keep fingers clear, to get window in the fully up position. You'll have to pull the door panel to get to where your problems lie. The good thing is, if it is a bolt or nut & washers that fell off, it will still be in the bottom of the door, waiting for you. Good luck & keep us posted! :cheers:
 
X2 on window regulator failure. It sounds like what mine did a couple years ago. A new regulator fixed it.
 
Back
Top Bottom