Pig Quarter panel solution... what do people do

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Mikesta

Never decruiserfied
SILVER Star
Joined
Jan 28, 2005
Threads
393
Messages
3,796
Location
Missouri
Website
www.showmerents.com
Picked up another Pig... running driving... and overall decent shape. It does need some body work. What are people doing for the rear quarter... the curvature by the tailgate? I also need to replace the floors... I looked on SOR and found no replacement body parts? Is there another place that sells these?

It was originally Orange/white, but Im going to make it Red/White/Red to match my LV.
 
Good question, same issue with mine, it's mostly Bondo. A good body person can fabricate anything, I know you've seen the 45LV resto thread... I'd like to trim mine just a bit, for better departure angle, maybe with some built-in armour there. Dunno, kind of torn at this point between doing the complete resto route or a slightly modified semi-capable wheeler. Pretty satisfied with it mechanically so far, time to think about the bodywork, as money and time permit.

nial
 
You would think with all the pig owners out there that Floors and lower quarters would be made for them... I'm sure there is money in it. Beats bondo... or 5-10 hours banging metal and fitting to perfection.. shoot, I'd pay $90-$110 per side for the rear panel... and FLOORS... would pay a chunk to just to save time and get it right the first time!
 
The body shop thats doing the body work on our pig fabbed new ones with a bit heavier metal, and they came out great ! He said after cutting out the rusted outer panel, there was alot of rust on the inside as well, along with about 60 lbs of dirt. He cut out all that he could, replaced w/new metal and treated the rest with rust preventative. So thinking you can just do the outside, exposed quarter panel part is just a cosmetic band-aid without addressing the whole issue as i found out. Do it right the first time and hopefully it will last a while, IMO. Good luck, and post some pics !
 
that's right, do it right. My PO (or the one before him...) had cut and replaced the fenders and such, but apparently didn't bother with any of the inner rust issues. Well... "up from the paint comes a-bubblin'... rust" So, now I got "sculpted" rear fenderwells. Hit my rocker earlier this summer, and damn near half the thing fell off (OK, now I'm exaggerating...). Doing some wiring stuff on the interior and there's NOTHING behind the little vinyl kick panels in front of the doors... Long road ahead, but it runs nice... yeesh. Wife just shakes head... Floor panels, need those too...

nial
 
ridgerunner said:
I bet Eshan would be willing to make some, depending on how deep your pockets are.

The other option is to cut them off and weld is some heavy steel like Morgan, Andre, and others.
I have already had some made as samples.. Just waiting for someone to order a set to start production.. I thought the interest died out.
Ehsan
 
It was originally Orange/white, but Im going to make it Red/White/Red to match my LV.[/QUOTE]

Do you have the color code for the orange/white. should be painting late next week and searched but could'nt find that combo. Any help would be much apreciated. Mike
 
Mikesta said:
That is an awesome thread... I am seriously considering this for my ride.


Worked very well and has held up to some serious abuse. There are no issues whatsoever with the rocker sliders. I had the truck drop off a big 5 foot boulder and when the rear went off the truck literally fell 3 feet or so right onto the slider... twice in the same night. Held up fine but the second time it didn't put any dents in it but cracked the bondo I have above the slider pretty badly. If no bondo then it will hold up great I think... FWIW... Andre
 
Ive been replacing my quarters one piecs at a time and rolling the edge.

As for floor pans:
1. I made a template out of cardboard of the hole I was repairing. Including and angles involved.
2. I took the template to work and cut out thicker metal and broke the angles on a metal brake. Or you could take the templates to your local metal shop and have them do it.
3. Clean all the area of ROT and weld the panels in and finish the seams with Seam sealer and top coat with a high quality primer and paint.

My rear sil is bad. I plan on taking the PIG next month to our local Metal Fab shop and have them make me a rear sil and possibly quarters if they can handle the rolls. These are the same guys that made my body mounts for me. I will keep you informed on what the outcome is.

Chuck
 
Back
Top Bottom