Picking apart a non nav LX, which pieces are important for a swap?

[Francis K]

Hi fellas, I have the opportunity to pick apart a non nav 99 LX and I was curious which parts I should pull out besides just the bezel and controls themselves for someone who wanted to do a swap? Do I need to grab the connectors and radio as well? Can you even pull the other end of those connectors out from somewhere or do you just snip them?

 

[Trunk Monkey]

Thread 'LX non nav conversion parts list discussion (2003-07)'

Mar 1, 2018

edited april 30th for clarity.

First off, I'll attach all my lexus PDFs needed below and in the next two posts.

Starting with the easy stuff, the top computer screen, case, and connector.

computer 8326560220
case assembly 83240-60220

And whatever double din you need or want. It has come to my attention that the toyota OEM part is a way better part, if only in the fitment aspect of things. It's part number
#55412-60310 $58 partsouk, compared to the $30 ebay one. The same side adapters fit the stock part. So any adapters from ebay or amazon work with the...

• jerryb
• Replies: 281
• Forum: 100-Series Cruisers

• 

Several other bigger NAV to non threads out there too.

 

[Francis K]

Thread 'LX non nav conversion parts list discussion (2003-07)'

Mar 1, 2018

edited april 30th for clarity.

First off, I'll attach all my lexus PDFs needed below and in the next two posts.

Starting with the easy stuff, the top computer screen, case, and connector.

computer 8326560220
case assembly 83240-60220

And whatever double din you need or want. It has come to my attention that the toyota OEM part is a way better part, if only in the fitment aspect of things. It's part number
#55412-60310 $58 partsouk, compared to the $30 ebay one. The same side adapters fit the stock part. So any adapters from ebay or amazon work with the...

• jerryb
• Replies: 281
• Forum: 100-Series Cruisers

• 

Several other bigger NAV to non threads out there too.

Thanks brother, yea I went through them which is how I came to the conclusion it wasn't going to work for my 07. Changing the thread topic.....couldnt find much in regards to what should be pulled out from a non nav truck.

 

[jerryb]

if anyone has this chance in the future, take the whole assembly, side vents and left and right seatbelt/ center lock assemblies.
Best if you can cut the wires behind the car side connectors, that way you have colors and blank spaces in the original car.