Part Question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 1, 2013
Threads
21
Messages
429
Location
Redwood Empire
Hello,
On my 2000 LX the Chrome that surrounds the license plate is starting to bubble. It has not cracked, but it appears that is the direction it is going. I just did not know what the part name for this surround would be. Any information would be hugely appreciated.

I might seem OCD to fix it, but the truck is in such good condition that this is the only exterior piece in need of refurbishment. Pretty impressive for a 13 year old truck.
All the best,
Jack
 
Hello,
On my 2000 LX the Chrome that surrounds the license plate is starting to bubble. It has not cracked, but it appears that is the direction it is going. I just did not know what the part name for this surround would be. Any information would be hugely appreciated.
Mine's an '01 with only the top horizontal chrome bar above the plate. I'd call it "the chrome tailgate trim that surrounds the license plate".

It's easily removed from the tailgate...thinking you may be able to have it replated cheaper than getting a new one from Lexus...but I'd start with Lexus.

Steve
 
The upper chrome piece is about $75 w/ discount
76812-60010

The lower portion (~$400) is not just the chrome surround but the painted plastic tub under the license plate. You might be able to remove it and maybe it'll look like an LC... (with scuffed paint). I've never had mine off.
76801-60040-A0 WHITE PM., 057
76801-60040-B0 GRAY ME.OP., 1C2
76801-60040-B1 GRAY M.M., 1C3
76801-60040-C0 BLACK, 202
76801-60040-E0 BEIGE ME., 4M9
76801-60040-G0 GREEN MC., 6R1
76801-60040-G1 GREEN M.M., 6S5
76801-60040-J0 GRAYISH BLUE ME., 8P6

The other alternative is Plastic-Dip!! $8
 
Mine's an '01 with only the top horizontal chrome bar above the plate. I'd call it "the chrome tailgate trim that surrounds the license plate".

It's easily removed from the tailgate...thinking you may be able to have it replated cheaper than getting a new one from Lexus...but I'd start with Lexus.

Steve

Steve,
Thank you very much for the reply. I am taking my LX into Lexus tomorrow so that they can preform the two recall campaigns so I can run it bu them as well.
Cheers,
JJ
 
The upper chrome piece is about $75 w/ discount
76812-60010

The lower portion (~$400) is not just the chrome surround but the painted plastic tub under the license plate. You might be able to remove it and maybe it'll look like an LC... (with scuffed paint). I've never had mine off.
76801-60040-A0 WHITE PM., 057
76801-60040-B0 GRAY ME.OP., 1C2
76801-60040-B1 GRAY M.M., 1C3
76801-60040-C0 BLACK, 202
76801-60040-E0 BEIGE ME., 4M9
76801-60040-G0 GREEN MC., 6R1
76801-60040-G1 GREEN M.M., 6S5
76801-60040-J0 GRAYISH BLUE ME., 8P6

The other alternative is Plastic-Dip!! $8
My sincerest thanks. This is a wealth of information and I am in your debt.

Go to www.toyodiy.com and find your car and part numbers.
Best site ever.
I am going to check that site out right now. Thanx!
Cheers.
JJ
 
Mine's an '01 with only the top horizontal chrome bar above the plate. I'd call it "the chrome tailgate trim that surrounds the license plate".

It's easily removed from the tailgate...thinking you may be able to have it replated cheaper than getting a new one from Lexus...but I'd start with Lexus.

Steve

Could you please elaborate how you removed it? Simply popped out with a prybar or did you have to remove the liner of the lift gate to get to it?
What about removing the license plate surround piece - I think the interior panel needs to be removed to get to that one. TIA
 
76812-60010
The Chrome Garnish on the 1999 LX470 lift gate is a PITA to remove the adhesive. Beware.

Had to use blue plastic interior “trim puller” to scrape off most of it to resist scratching paint. Then after this arm wrenching slow slow scraping, a bottle of non paint harming adhesive remover.

Also had to let the adhesive remover settle in for 5 mins before scraping again. Even had to go down to the finger nails.

DO NOT use harsh adhesive remover or your paint will be gone.

If you are going just for improving cosmetic looks from the bubbling, I would NOT recommend it. My 99 had bubbled like others due to poor manufacture, but mysteriously was lost in a car wash this year. I had to replace it since the crappy green and brown stained adhesive leftover is uggglllyyy.
 
I'm thinking about sanding mine and putting wrap material over it in dark grey or black. Too much (crappy) chrome for my taste. Sounds like I shouldn't remove it first so thanks for that. :-)
Lower panel/license surround already needs a few clips so will see on that.
 
I'm thinking about sanding mine and putting wrap material over it in dark grey or black. Too much (crappy) chrome for my taste. Sounds like I shouldn't remove it first so thanks for that. :)
Lower panel/license surround already needs a few clips so will see on that.

Have you considered Plasti Dip - it would be easier and cheaper? Plenty of videos on YouTube on how to use it.
 
Hi! Are these two pieces (top and bottom chrome) held in on the other side? Do I need to remove the interior trim to get to any nuts? Or simply just gently pry them off?

for anyone having issues in the future:
Top one pry of with plastic pry bar
Bottom - you need to remove the interior trim and remove:
2x bolts
4x white clips
Easy job, but as mentioned earlier be careful with gasket remover!

706E9FD9-BA50-4014-82EC-09868CB5DF11.webp


E76712BB-9647-4D48-AB14-26F349CD3E2D.webp


0E1502F1-7500-41E2-B96E-1DBCE2706F32.webp
 
Last edited:
Bumping this as I was curious how this is hells in place. Unfortunately with the age of these trucks the plastics do get brittle. The two slots that hold the stud broke as PO who has something done in the past managed to screw its up then used loctite to secure the nuts. I was able to super glue the plastic but not optimistic that it’ll hold up.

Added pic for future reference, my model year the reverse lights are integrated with this garnish piece

A3F12D8C-CEF9-4CF9-A085-7D60E84A7CD0.webp
 
Back
Top Bottom