Part numbers

[DomSmith]

Looking for a little assistance in locating a Toyota part # from CAN. I'm looking for the FJ45 seatbelt brackets that were available North of the border (from me).

Anyone have a part # or a suggestion of a good dealer in Canada that may be willing to help with my search?

See pic here of what I'm looking for.

Much appreciated.

Dom

 

[AJAEbj42]

Call Steve at EBI

http://www.extremebends.com/

(604) 944-0382

 

[AJAEbj42]

http://www.toyodiy.com/parts/

http://www.toyodiy.com/parts/p_U_1976_TOYOTA_LAND+CRUISER_FJ45LP-KK_7152.html

edit: I see you have a '65 and toyota DIY doesn't go back that far? Give Steve a call.


Post up some pics of your truck!

 

[DomSmith]

Thank you. I'll give Steve a call.

I believe they were available mid to late 70's so the link provided may be useful. It shows 3 point as not applicable so I'll dig a little deeper. I will have to make some adjustments on my top for their use on my 65.

I appreciate the fast reply.

 

[Enigma]

Would a '65 even have factory seatbelts?

 

[DomSmith]

It had the old OEM red seat belts that clipped into the eyelets. I removed them and replaced them with rear jump seat lap belts that I had re-webbed and I refinished the buckles. I'll look for pics.

Here's what the OEM belts look like (not my pic):

Here's the rear jump seat belts I refurbished:

 

[Enigma]

Trying to remember if my old 45 had a shoulder harness....

You could also try pm'ing @Brewsterfire here on 'mud. If it did have that bracket he might have some info for you as he's the new owner.

 

[DomSmith]

Post up some pics of your truck!

Here's the day I brought it home...

Here's as she sits now....

 

[pbgbottle]

here is the part numbers see pics reinforcement

..

part numbers

 

[DomSmith]

Thanks for all the great assistance guys. I really appreciate it.

I spoke to Steve today so we'll see what that turns up.

 

[Enigma]

You could try Beno and/or CDan with this part number, but I doubt it's still available from Toyota.

http://toyota-usa.epc-data.com/land_cruiser/fj45lp/3679/body/6151/61237/

 

[Enigma]

Seems to be lots of them available online.....for Corolla's

 

[DomSmith]

Seems to be lots of them available online.....for Corolla's

I'm not seeing anything available online?

60045-90300 gets me nothing.

 

[DomSmith]

Steve has one and is looking for another. Thanks for the lead.

 

[Enigma]

Might be worth it, to someone anyways, to replicate them. Doesn't look too complicated.

 

[DomSmith]

That's what I'm hoping to do if it's not too cost prohibitive. These seem to be a pain to get down here and I know guys could use them. I had planned on borrowing a set since I've had a hard time sourcing them and making them for my rig.

I have access to steel and a water jet, just need to see if the stamping/shaping is doable for a small run.

 

[Fantom]

To duplicate that exactly you'd have to make a die and that gets expensive fast. Or form each one by hand. You might be better off doing your own version of it out of a couple pieces welded together.

 

[DomSmith]

Until I have a set in hand I'm just off my perceptions. I was hoping to water jet a template piece and have them stamped. Not sure if that will work until I have a set.

 

[DomSmith]

Still looking for a passenger side...