Parabolic/SO

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 28, 2005
Threads
72
Messages
1,209
Location
lake tahoe
Anybody use rocky mountain parabolic springs (or tic) with a Spring Over yet? Due to a leaky aftermarket MC and rear slave cylinders (2 years old, 4000 miles, I got cheap and bought the taiwanees stuff instead of the Toyota stuff. It should have lasted longer IMO), and a bad rear axel seal (caused by brake fluid?) I'm bumping up my SO/RDB conversion. I was wondering if anybody has used parabolic springs in conjunction with this? Or considered it?

i did a search, but i couln't find any write ups on an actual Parabolic/SO.



Opinions on RMC springs would be helpful also.

zimm
 
I'd love to see a set of parabolics done with the spring over....I think it would be a great combo for flex, clearance, keeping things low, etc....

...wonder if they sell just rear "packs" for the 60-series....hhhmmmm.......toss a set up front on mine and drop the rig another inch or so....
 
When these springs were featured in Trails on the FJ45, I sent TIC an email asking about springs for my FJ40. I also inquired about SOA and shackle reversal. Here is their reply:

Hi J.C.,
Thank you for your e-mail.
The (4) spring kit incl u-bolts is Eur 629,00
KONI shocks are Eur 368,00
Shipping is Eur 298,- (Fedex)

The dimensions of the springs are identical to the original spring so you can handle them the same. SOA and Shackle rev. are possible. Longer shackles can make the spring weaker so I advice to keep with original lengths.

If you have any questions please contact me.

Regards,

Paul Heijstee

TIC Parabolic Suspension Systems
Roysloot 8c (Klei Oost)
2231 NZ Rijnsburg
The Netherlands
Tel: +31 (0)71 517 00 67
fax: +31 (0)71 408 16 39
mob: +31 (0)6 53 504 557
webite: www.parabolicsuspension.com
e-mail: info@parabolicsuspension.com
 
I've been trying to get a set of TIC parabolics from Great Basin Rovers since April. They keep telling me there have been production problems with the FJ 60 springs, and they'll be getting them within a month or two. The last thing they told me is that they may be able to order just one set seperately and have them shipped directly to me. It would be cheaper (for shipping) to do a group buy. Is there anyone else interested? The guy at GBR doesn't seem terribly motivated to deal with Cruiser springs, but maybe would be if there were enough people with money lined up.
 
rocky mountain has the fj40 parabolics in stock. no fj60 springs. apparently they are not the same as TIC:


> "...These are Rocky Mountain Brand made in Canada Please do not confuse >us with TI Console who make stuff in Iran."


first i heard it. I will not be buying springs made in Iran. (assuming this is true) besides the canucks keep a nice clean 51'st state up there and i like to support the home team. :D


as to using these springs on a spring over, they wrote:


>"...I have no experiece of spring overs..." So, who knows what would occur.

all quotes are from an email from Rocky Mountain.
 
Zimm said:
rocky mountain has the fj40 parabolics in stock. no fj60 springs. apparently they are not the same as TIC:


> "...These are Rocky Mountain Brand made in Canada Please do not confuse >us with TI Console who make stuff in Iran."


first i heard it. I will not be buying springs made in Iran. (assuming this is true) besides the canucks keep a nice clean 51'st state up there and i like to support the home team. :D


as to using these springs on a spring over, they wrote:


>"...I have no experiece of spring overs..." So, who knows what would occur.

all quotes are from an email from Rocky Mountain.

Zimm: Rocky mountain is full of s...
The springs are made in Europe not in Iran.

I've also seen Rocky mountain parabolics next to TIC parabolics and TIC is far superior in quality and finish.

I got TIC parabolics on my troopie and have beat the crap out of them and they still hold.

If they would work with a SOA, i really don't know, since SOA is not common in these parts of the world.

HTH

Mark
 
Yea I've got a 79 with tic springs soa'd. Had them on for about 5 months now, and over all real happy with them, good flex, decent on and off road ride. The only thing i would do differently is to get the stock verses 2.5" lift springs, didn't need the lift.
 
Back
Top Bottom