Oxygen sensor Wiring question?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 13, 2007
Threads
2
Messages
3
I just purchased a Bosh oxygen sensor for my 96 land Cruiser and the guy claimed that the wiring diagram would help connect the factory plug into the universal sensor... need I say more. Has anyone done this already who could point me in the right direction. The plug in unit has a blue, white and two black wires while the new sensor has gray, black and two white wires. I could try trial and error however, I'm sure someone has already figured it out, or could explain how to figure it out. This is my first post on a suggestion from a friend. Cool site with lots of good info. Thanks
 
Do a simple search....SUMOTOY has done some write ups about it.

I did my o2s last weekend, and as much of a bitch it was, I am SOOOOO glad I ordered OEM and didn't have to experience that added bit of fun to the project...

More than you want to know already here, just search....
 
I learned a lot from this thread, and you'll see some pics of my universal sensors. The diagram in the sensor box require some logic to figure out, I remember something about a purple wire. By gradual elimination of options I figured out which were which. I also played with a multi-meter a bit. https://forum.ih8mud.com/showthread.php?t=75975 Be sure to read the thread to it's dramatic conclusion.

If you don't want to read through all that, everything you really need to know is in this thread: https://forum.ih8mud.com/showthread.php?t=89849 Good luck with it!
 
Last edited:
Back
Top Bottom