Ordered some OEM snorkels....who else is in for one (In Edmonton, 2 left)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 31, 2007
Threads
121
Messages
734
Location
Edmonton
PLACING NEW ORDER NEXT WEEK: 80 Series OEM snorkels....

Hi Guys,

I'm going to place an order for a couple of TOYOTA FACTORY snorkels(I can probably only get a limited number) and just wanted to put it out there to see if anyone wants to put their name down for one.

I'm 99.9% all pieces are here for the install including ducts, brackets, bolts/washers, rivets etc, etc and the template which was supplied to me by MOT, an excellent boardie! If you needed to source anything, it would be a bolt or something like that.

All parts are for the 80 series vehicles...if your pre-order with me you can choose the 70(cone) or 80(bulb) series topper. The US models will need a small mod in terms of relocating the antenna for install.

Anyhow, after everything was said and done, Ill be looking for approx $425CAN for the set up plus shipping to you which is very economical through Fedex ground (4-5 business days to most of North America)

Please email any questions to whosthecoolguy@hotmail.com
I find it tough to maintain the PM inbox sometimes.

Thanks for the look!

Jeff

Kit
OEM_Snorkel_0021-1.jpg


Installed on US Spec Vehicle - Antenna will need to be relocated for this install
100_13151.jpg


Installed on JAP spec vehicle
38388i3_20-1.jpg


70 Series Topper
2309kmd_20-1.jpg


80 Series Topper
Snorkel_March_13_0172.jpg
 
Last edited:
Hey Andrew,

I ordered 2 or 3 extras for guys that were on the fence but leaning towards yes...then didn't hear back from 2 of them.

Came up with some extras Jeff?

Andrew
 
Hey Andrew,

I ordered 2 or 3 extras for guys that were on the fence but leaning towards yes...then didn't hear back from 2 of them.

Ahh... too bad... but good news for anyone that wants one I guess! :grinpimp:
 
It probably wouldn't fit on a 60, the profile where it attaches to the fender would be round and the 60 is more angular.
 
Back
Top Bottom