OME Caster Correction install

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 11, 2003
Threads
27
Messages
377
So...I have a little time to go and install the OME caster correction bushings on my 97 and I've lost the instruction sheet that comes with it!

Can anyone point me to a copy? Or even fax me one? I'll be out of daylight soon enough...

Cheers all!
 
So...I have a little time to go and install the OME caster correction bushings on my 97 and I've lost the instruction sheet that comes with it!

Can anyone point me to a copy? Or even fax me one? I'll be out of daylight soon enough...

Cheers all!

Get Landtank's template to make the job super easy.

See here!

https://forum.ih8mud.com/showthread.php?t=171233
 
there really isn't "good" instructions. Just have the front bushing hole up and the rear down, and the distance between the two should be the same distance as the two holes from the stock ones you took out.
 
This really isn't something you want to mess up, as it has to be absolutely exactly right, or the arms won't go back in. I also recommend the template and taking a couple of days off. Once they are in, you may not be able to get them back out, without burning them out. Mine stock ones wouldn't come out, even with a press.

But otherwise, Slee's site has some info about the castor bushings, but I don't think the full directions. He also refers to using a template. I'm sure if you search this site and on the web, you'll find some detailed install instructions.

Good luck.
 
there really isn't "good" instructions. Just have the front bushing hole up and the rear down, and the distance between the two should be the same distance as the two holes from the stock ones you took out.

I have to say...after all the reading in previous days/weeks/months and after the lack of instructions...this is the ONLY DESCRIPTION OF THIS PROCESS THAT EVER MADE ANY SENSE!

Thank you...I took the newly adjusted rig to my local shop to have them check the work and damn if they didn't describe it the exact same way. It seemed like some geometry SAT question until now. I followed concretejungles' instructions to the T and it worked a charm. DUH!


:cheers:
 
todd, glad it worked out for you. I was a little worried my post came out too simplified, but that is the basic gist!
 
Back
Top Bottom