Old Lund WC-14/S-14 Remodel Project (1 Viewer)

Joined
Jun 3, 2005
Messages
1,174
Location
Tropical Fargo, North Dakota
We've had this old 14' Lund as long as I can remember as a kid. Finally decided to freshen it up a little bit for the kids to mess aorund with at the lake. I originally had a 7.5hp Merc that we beat the snot out of for 10 years at least as a kid. Upgraded to a 1996 15 hp Johnson that's hardly seen any hourse the past 10 years.

Anyway, after googling "14' lund floor" and seeing what other people have done, I decided to add a floor and a casting deck and use some extra seats we have from our bigger boat that don't get used.

First off, I'm no carpenter so this is a redneck as it gets using available materials in my garage at the time. Other than the carpet which I bought for about $14 at Menards. Will probably last about as long as you'd expect $14 carpet to last.

I wanted to remove all of the bench seats and make one big open floor like most on the web did, with 3 pedestal seats, but opted for a quicker version of just the casting deck and a couple seat mounts. Maybe next year for a bigger undertaking.

We had the 50lb MinnKota on the bigger boat but has always been way underpowered in a good wind. On this thing, 50 lbs is a rocket. We can cruise on 12volts. :)

I'll add some more details later. Just a few pics for now. :cheers:

Crap, pics are on laptop that puked. Will add them tomorrow.
IMG01108.jpg
IMG01109.jpg
IMG01110.jpg
 
Joined
Jun 3, 2005
Messages
1,174
Location
Tropical Fargo, North Dakota
A little update on the Lund. Gutted it back to bare awhile back and started over. (again). I have some buildpics somewhere, but here it is in action last week. Also added a 30 hp 2 stroke Evinrude and sold my 15 hp. Cheers!

20160625_202108.jpg


20160623_165242.jpg


20160623_195449.jpg


20160623_182626.jpg


20150816_091550.jpg
 

Users who are viewing this thread

Top Bottom