Oil leak - 350 engine

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 7, 2004
Threads
14
Messages
116
Location
Cullman
Hey guys

I am having oil leak problems with a 350 engine mounted in my FJ 40. When running at highway speeds it blows oil out of the dip stick tube and filler hole. It didn't do this until I had a friend of a friend adjust the valves and adjust the carburetor.

Any idea on what could cause this to happen? The engine runs strong and no sign of any damage. Fairly new rebuild - about 5,000 miles on it.
 
undo whatever he did. Oil out the dipstick/filler is indicative of positive crankase pressure. Make sure the PVC valve is functional...and hooked up, of course.
 
I'll check the PVC valve again tonight but when I checked it this weekend everything seemed to be hooked up and working fine.
 
Even with no PCV there should not be oil blow at the dipstick. Have is it running compared to before the adjustment?

R
 
The engine runs no different than before the valves were adjusted.

I have 2 questions:

1) Could the valves out of adjustment cause oil blow-by?

2) Could a blown head gasket cause this?
 
Oil Leak

Took much pressure in the case.

Make sure your pcv valve is hooked up to your carb, and also the vent on the other valve cover needs to lead up to your air filter bottom plate.

At highway speeds, or higher RPM, you lose vacuum. That's why it's pumping oil out.

I had the same trouble on my Cruiser. A buddy of mine is hooking up a smog pump on his drag car to keep pressure equalized.

:cheers:

J.R.
76 FJ40
Chevy 350/SM465/NP205
Dana 60/14 Bolt
 
PCV valve on one valve cover, $5 part, replace it....
breather on the other valve cover, either self-filtered or thru the air cleaner

do NOT try and seal the motor up too tight...
 
Thanks for the response.

Yes, the PCV is hooked to the carb and the line is clear.

I'll replace the PCV valve and run a self filtered breather on the other valve cover. Strange how this started after he "adjusted" the valves.
 
Back
Top Bottom