Pics coming on Sunday. Sorry for the delay, it's been kind of hectic around here.
Official ONSC member buying/selling thread (8 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Pics coming on Sunday. Sorry for the delay, it's been kind of hectic around here.
i have some 35 x12.50s, three are about 50 % and one is bald. there on 16 inch steelies.
like 150 or so, need them gone
like 150 or so, need them gone
hmm these wouldn't fit under a 40 with a 4" lift would they? I would think they might do some rubbing....
As soon as I can get down there i'll take them
I'm going to Winston-Salem Wednesday. If you want I can get them that far if you want to meet me.
Brandon
S4Cruiser
SILVER Star
, unless you do some cutting.
Know the specs of the wheels? Wonder if they would fit on my FJC so I can use them as a base for building up some bead locks.
The FJC wheels stock are 4 5/8" back spacing, if its 4 - 4 5/8", I'll take the set of your hands...
little_joe
SILVER Star
Old Man Emu stock height replacement springs for an 80 - OME 861 and 862
Old Man Emu stock height replacement springs for an 80 - OME 861 and 862. They are 2+ yrs old, in fine shape. $150/offer, located in the Raleigh area.
Old Man Emu stock height replacement springs for an 80 - OME 861 and 862. They are 2+ yrs old, in fine shape. $150/offer, located in the Raleigh area.
Hmm if I had a cheap diesel and some cash to DD that i'd be all over it 
Here is the list of parts/prices from the '73 FJ40. Pics to come as soon as I upload them. There are lots of small parts not listed, ask if you need something.
body tub - 98% rust free - $800
frame - good - $100
front fenders - very good - $150 pair
hood - very good - $150
grill - very good - $75
running boards - very good - $50
rear half doors - very good - $200
full front doors - good - SOLD
windshield frame - very good - $100
t-case - turns freely - $100
axles - roll fine - $200 pair
driveshafts - good - $50 pair
aftermarket 6-point roll cage - good - $150
bikini top - good - $40
aftermarket dash cap cover - new - SOLD
front bucket seats - good - $100
long jump seats - good - $50
header - good - $50
skid plate - good - $40
grab bar - good - $15
tire carrier - good - $50
body tub - 98% rust free - $800
frame - good - $100
front fenders - very good - $150 pair
hood - very good - $150
grill - very good - $75
running boards - very good - $50
rear half doors - very good - $200
full front doors - good - SOLD
windshield frame - very good - $100
t-case - turns freely - $100
axles - roll fine - $200 pair
driveshafts - good - $50 pair
aftermarket 6-point roll cage - good - $150
bikini top - good - $40
aftermarket dash cap cover - new - SOLD
front bucket seats - good - $100
long jump seats - good - $50
header - good - $50
skid plate - good - $40
grab bar - good - $15
tire carrier - good - $50
Last edited:
I'll take the grill and windshield frame off of you.
Still interested in the tub. Send me pics when you can. Also interested in the rear half doors.
Brandon
bbowden4@ec.rr.com
I think I want the roll cage....
may be interested in the front bucket seats and possibly long jump seats...can you email me pix? dukebluerog@carolina.rr.com
thanks..R
thanks..R
The pickup (bondota) is up for sale, going to get out of the "extreme" end of 4x4ing and back into the VERY casual side.
Emmie and I are planning on picking up a GX470 (120 series) in the spring, been watching them and test drove one already. It will pull the camper easily and VERY mild wheeling like the OBX, etc.
https://forum.ih8mud.com/vehicles-t...419-1985-toyota-pickup-98-1-35s-winch-nc.html
Trades are welcomed, especially if you just happen to have a Corvette you want to get rid of! I am taking the hobby dollars and hopefully gonna fulfill a 39 year dream to own a Vette.
Sam
Emmie and I are planning on picking up a GX470 (120 series) in the spring, been watching them and test drove one already. It will pull the camper easily and VERY mild wheeling like the OBX, etc.
https://forum.ih8mud.com/vehicles-t...419-1985-toyota-pickup-98-1-35s-winch-nc.html
Trades are welcomed, especially if you just happen to have a Corvette you want to get rid of! I am taking the hobby dollars and hopefully gonna fulfill a 39 year dream to own a Vette.
Sam
Keep
GOLD Star
SOLD
(5) 80 series OEM steelies power coated black. Good condition, a few minor chips in the coating but no rash. Pick them up near Burlington for $200.
(5) 80 series OEM steelies power coated black. Good condition, a few minor chips in the coating but no rash. Pick them up near Burlington for $200.
Last edited:
Maria, not too sure of the year stuff you are looking for but i just got all new hoses from the dealership here for my 87 fj60.
Just a thought. Had them the next day.
Just a thought. Had them the next day.
sorry so late of a response, i put two on my stock 80 to see if i could turn and i cant. Ill measure them tomorrow...
