OEM Frame bumpstops??

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 28, 2007
Threads
23
Messages
231
Location
Klamath Falls, OR
While rebuilding my front end this weekend I noticed that I had some bumpstops underneith the frame above the axle as well as some inside the springs. My cruiser is stock height (for now!). I spoke to Dan and he said that he had only heard of these being on '93 cruisers. Mine is a 1994 and is 09/94 production date. So it is a late model 94.

Is this an OEM bumpstop or something that one of the many PO's added. The real question is?????? Can I use these with a spacer for a 4" lift?

Hopefully Dan will take a look and chime in here... Are these the OEM bumpstops?



PAssenger Side
133.webp
134.webp
 
Drivers Side

Driver Side
135.webp
136.webp
 
Can I use these with a spacer for a 4" lift?

Hopefully Dan will take a look and chime in here... Are these the OEM bumpstops?

I'm not Dan but I can tell you those are factory front axle bump stops. You can add a 1-2" spacer and use them if you decide to go with OME L-shocks; they are longer than the standard OME shocks and come with Christo's 4" kit.

We have heard that 93's and some 94's have the axle bump stops. I pulled a set off of a boneyard '93 many years ago.

-B-
 
IYou can add a 1-2" spacer and use them if you decide to go with OME L-shocks; they are longer than the standard OME shocks and come with Christo's 4" kit.


-B-


Thanks -B-
You mean for once I might actually save a few bucks!!!! I don't have to buy bumpstops :clap:. I pretty sure I am going with Slee 4" springs and will definitely be using the L shocks. Hopefully there is someone who has these bumpstops and Slee 4" springs that can tell me how big of a spacer I need.

oops I just saw that you said 1 to 2" spacers....
 
Last edited:
Any ideas why I would have frame mounted bumpstops plus the puck stops inside the springs??? Now that I look at them it appears the Passenger side has never touched the axle and the D/S has hit many times.....
 
I actually picked up a set of those last weekend. Before I knew about these I used the stops off of a FJ62. The FJ62 stops are both the same size and the same as the longer stop on the 80. To get the FJ62 to be the correct length for protecting the longer shocks of a 4" lift I had to add a spacer to the one on the DS. The taller FJ62 bumpstop was already the correct height on the PS.

So if using the FJ80 bumpstops you would need to add a spacer to both sides. I would add a 1" spacer to both sides to make sure you are protecting the longer shocks used in the 4" lift. The nice thing about these stops is that they are the correct shape for the axle. The PS is flat where it contacts the axle next to the diff and the DS is curved where it contacts the axle on the tube.

That puck in the spring IMO is more of a cushion for when a stock truck hits a bump so as not to jar the driver than a true bumpstop like the ones on the frame.
 
Back
Top Bottom