nv4500 adapter?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 18, 2004
Threads
38
Messages
432
Location
In the shop cuttin' parts
Website
www.greatlakeswaterjetinc.com
Anyone know of an adapter to go from a Chevy 32-spline NV4500 to the HF2A t-case? If not, what would be a good offset/offset case to put behind the NV? Old Cruiser? Also, who has the clutch and brake pedal assy. for a 94 FZJ80? Thanks.
 
Cancel this thread and go to Next Stupid Question.
 
Well just stumbled upon this question and its one I would like help answering. I have a 2001 gm nv 4500 31 spline and I'm trying to find a adapter to go to my hf2a in my 1997 landcruiser. Just easier bringing this thread back then making my own.

Anyone know of any places making adapters for this combo???? Plan on using with one of my 4bd1/2t engines. So far the only person I'm seeing that has mated a nv4500 to a hf2a is "wheelingnoob" He used a diesel adapters.com adapter and it doesn't seem that they have that adapter listed on their site (plus their stuff seems kinda pricy).

I have a mill with a dro and a good machinist, and would love to just make my own... but I've never torn down a transmission/transfer case so I really would need guidance on how to make this adapter.

Thanks guys. -Tyler.
 
Well just stumbled upon this question and its one I would like help answering. I have a 2001 gm nv 4500 31 spline and I'm trying to find a adapter to go to my hf2a in my 1997 landcruiser. Just easier bringing this thread back then making my own.

Anyone know of any places making adapters for this combo???? Plan on using with one of my 4bd1/2t engines. So far the only person I'm seeing that has mated a nv4500 to a hf2a is "wheelingnoob" He used a diesel adapters.com adapter and it doesn't seem that they have that adapter listed on their site (plus their stuff seems kinda pricy).

I have a mill with a dro and a good machinist, and would love to just make my own... but I've never torn down a transmission/transfer case so I really would need guidance on how to make this adapter.

Thanks guys. -Tyler.

Call them and ask, I am sure he would make one
 
A bunch of us have mated HF2AV to an NV4500. You need the adapter plate and a 2WD NV4500 mainshaft that has been cut down and resplined to the Toyota input shaft pattern. You then rebuild the NV4500 with this modified main shaft and bolt it all together.
 
Okay i guess i understand how this adapter works now.

Anyone know what the deal is with the problem people were having with transmission fluid getting mixed with the fluid in the transfer case?
Wondering if that was solved? I just heard it mentioned by a member in another thread.

Thanks
 
Camotubebender thanks for the link. Looks like ill prob buy from this place, just slightly worried now about this oil leak problem. I want something ultra reliable.
 
Ya nevermind. I wont be ordering from duiser offroad. Looks like its that guy Dustin that has scammed a lot of people out of their money.
 
And looks like dieseladapters.com is also owned by Dustin.

I guess he needed to set up multiple businesses in order to try and avoid people finding out they are all the “same company” producing adapters.

I guess i should just have my machinist machine my own adapter plate and broach out the splines on a 2wd main shaft.
Gonna take a while longer to do that now. If anyone could help with the method of sealing oil from the transmission to the tranfer case, id really appreciate it
 
Oil is kept in the trans via a toyota seal pressed into the adapter plate. It's the same seal that is used on the input shaft of the HF2AV but pressed in the opposite orientation.

Part number 90311-48016
20160330_103449.webp
 
Last edited:
Back
Top Bottom