Noob looking for advice before purchase

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 5, 2016
Threads
4
Messages
21
Location
Charleston SC
Hello, I'm new to the forum and am currently in the process of closing a deal on a 93 FZJ80. I have done research on both this web site and slee web site for what to look for when buying one of these vehicles but wanted to hear form others if I should pass on this rig or not. It's has 202k miles, AC in INOP, and no lockers. Truck is super clean and has a clean CARFAX. The big issue is that the Current owner thinks it maybe burning oil. The sale price is 3500$, If this is the wrong area to post this I apologize in advance, thank you
 
You need to take It to a qualified mechanic and see If its leaking or needs a rebuild. Nobody can tell you without checking It out and testing to see If its In spec. Good Luck ! :)
 
You need to take It to a qualified mechanic and see If its leaking or needs a rebuild. Nobody can tell you without checking It out and testing to see If its In spec. Good Luck ! :)

Thanks for the quick response. I did forget that current owner did take it to a mechanic and was pointing to a ring job, I am pretty mechanically inclined and was look at doing work myself, minus maching, or possible engine swap. Was mainly asking if 3500 is a decent price going into this as a project, sorry I was not clearer. Thanks again
 
Most burning oil issues with the 1FZ-FE are a result of valve seals/guides needing to be replaced. That is normally done during a head gasket replacement. It is very rare at 202K miles that a ring job would be required.
 
Most burning oil issues with the 1FZ-FE are a result of valve seals/guides needing to be replaced. That is normally done during a head gasket replacement. It is very rare at 202K miles that a ring job would be required.
Thank you for the input, after doing more research I have to agree with you, your commit has put me at more ease about the purchase.
 
Most burning oil issues with the 1FZ-FE are a result of valve seals/guides needing to be replaced. That is normally done during a head gasket replacement. It is very rare at 202K miles that a ring job would be required.

^ this
 
Thanks for the quick response. I did forget that current owner did take it to a mechanic and was pointing to a ring job, I am pretty mechanically inclined and was look at doing work myself, minus maching, or possible engine swap. Was mainly asking if 3500 is a decent price going into this as a project, sorry I was not clearer. Thanks again

If your good with wrenches and the rig Is truly ''super clean'' then knowing seals are the highest probablity I think the Information given here points to a good deal. It sound like you know what your talking about. Good Luck ! :)
 
Back
Top Bottom