No Low Beams

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

chap79

This hobby has turned into a tool collection.
SILVER Star
Joined
Mar 20, 2009
Threads
98
Messages
3,212
Location
Partlow, VA
Took a trip out to Joshua Tree this weekend and did quite a few miles of wash board roads in the park and surrounding BLM land. Get in this truck this morning ('97 LX450) to go to work and low beams will not turn on. High beams work in both on and flash position. I have the Slee head light harness.

I have checked the fuses, fine.

I removed the Slee harness back to stock hiring, still no low beams.

Changed bulbs, still no low beams.

What am I missing? Looking at the EWD I don't think the high beams would work either in the relay was bad :meh:.
 

Attachments

Using a 12v tester I have power at the sockets to the Red and White wire.
 
I'm not sure how the slee harness works, but it sounds like your white/black wire that provides ground for the low-beams isn't working correctly.

Check for continuity to ground/chassis on the white/black wire.

Per the EWD if anything else were wrong you'd either have power on one side or the other, or not have high-beams.

For both to have gone out at the same time.. I'm guessing the wire is bad between the E3 and E4 splices.

High beams get their +12v from the same relay/fuse/circuits as the low beams, but use a different - side.. it is switched/provided by the red/yellow wire in the high-beam switch.

So yes, I think you'll find you don't have a ground on white/black at the low-beam bulb sockets.
 
Last edited:
When mine quit working, it was due to one of the relays in the Slee harness that got wet and shorted out. But if you removed he slee harness completely and went back to stock and it still didn't work, shouldn't have anything to do with the Slee harness.
 
After checking the continuity between E3 and E4, checking all my grounds, and looking at everything for any signs of frays or brittleness I decided to drive 25 miles round trip to the auto parts store to get yet another set of bulbs. And guess what, they work!:censor:

Four bad bulbs. Damn the luck. I did get almost 6 years of use out of my Philips 9012's. So I can't really complain too bad...

@bloc Thanks for the sanity check.
 
I didn't even think to have you check continuity across the bulbs themselves.

KISS, or something.
 
Back
Top Bottom