Newbie with birfield problems (or something)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 29, 2008
Threads
2
Messages
11
Location
Adair Village, Oregon
I've had my 91 fj80 for 2 years, am obsessed with it and am now devastated. It has 33's on it and about 181,000 miles. It has clicked when turning for 6 months or so, and since every 4X4 I've ever had before made a similar noise when in 4 wheel drive I thought nothing of it (I don't drive it as much as my wife does) In the last week it got worse (much worse) so I planned on a knuckle rebuild this weekend. No problem, I have a great home shop and nothing but time.
Now for the devastation: the cruiser wouldn't move when I was in town this evening. Just a loud clack clack clack (make that sound super fast and loud to see what I mean) as though gears were just not engaging. "Transmission," my wife declared (she is a dedicated car-guy at heart) and my heart sank. I hate transmissions!
I had an idea, though, and it went like this. Perhaps the axle splines (birfields?) are shot, the differential is sending all power forward, and that is why we're not moving. So I pushed the diff lock button, put her in drive and away we went, theory proved, right?
Perhaps not. We made one stop to drop off a passenger, and now the noise is worse, the cruiser won't move (we were parked on an uphill) and I'm in front of my mercedes driving brother-in-law's house with my vastly superior vehicle making embarrassing noises and looking inferior.
As a last-ditch effort, I threw the old girl in 4-low and miracle of miracles we're back in business. We drove home at 30 miles an hour. All shifts smooth and uneventful. Over 30 mph and the grind returns.
So: Has this happened to you?
 
Check the drive flanges under the little dust caps/cups on the front axle. They have been known to strip and cause similar problems. All the power goes to the one stripped side and makes a lot of noise with no movement of the truck Although locking the centre diff should have solved that. Why you had to go into low range after that though I'm not sure...
 
You may have completely toasted a birf, and it bound up and wouldn't allow the truck to move. Putting it in low range gave it enough power to overcome the bind of the broke birf (bind of the broke birf, kinda has a nice ring to it). I'd get the front axle apart before driving it any more, you'll probably be replacing a few things and back on the road.

Edit- if you absolutely positively must drive it, you could probably remove the driveshaft and drive flanges (outer part of the hub, which the birfields interact with) and be OK, but I wouldn't drive it with those on. It is probably chewing on itself and you never know when it might bind up badly.

-Spike
 
this describes the symptoms of when I shattered a gear in the tranny of my fj62 (same tranny as the 80). Eventually the bits clogged up the tranny and it just wouldn't move. Hopefully this is not your problem. A birf is easier and cheaper to fix.
 
Drive flange. I'd bet my paycheck.

But you'll most likely need a new birf because of the stripped splines.
 
Drive flange. I'd bet my paycheck.

So why wouldn't it move with the CDL locked? That's where things got complicated. I am interested to see how this turns out.

-Spike
 
He said he engaged the CDL, then it worked. Also, he put it in 4-Low and it worked...
 
Other than it not working after a while with the CDL, thats exactly what happened to me. He will probably need a new birf and drive flange. Might as well buy a seal kit and swap those out while you're in there. Not too hard, especially if you have a good shop, and follow the good instructions in the FAQ. Good Luck. : ).
 
Since no one has said it yet:

Your truck should NOT make clicking noises when properly maintained. Keep this in mind for future reference.
 
My bad

Yeah, in retrospect clicking is likely bad, but I've never bought a new vehicle, in point of fact I can't recall ever being in one 30 years or so. Anyway, both rovers and a couple fords and one trooper all sounded the same. This is the first one to break. I'll be getting started on the thing this afternoon and will post pictures of what I find.
-aarondotnet
 
UPDATE: definitely the birfield

Update then. Got the old birf out and it's gross! I love this site though, you guys have made me a happy and informed 'wheeler.

The cage is ruined (wish I could just replace that) everything else appears ship shape.

I am trying to source the part same-day, but will likely have to get it shipped. The trials of living so far from a population center.

The working theory for now is that the center diff lock (cdl makes me think commercial driver's license) does not work with the dash button but does engage automatically in 4-low

I love you guys!
Balls!.webp
BirfCage.webp
 
I am trying to source the part same-day, but will likely have to get it shipped. The trials of living so far from a population center.


Oh come on, you're not that far from Corvallis!


Go with CDan anyway. Even paying for faster shipping, you'll likely come out money ahead. And you'll get what you need (and won't get what you don't need).
 
You need a new birfield and you will need to do something with the other side ASAP.
-B-
 
If it's the older short style birfield, original to the rig, you will also need a new style driveplate to match the new birfield.
 
okay, what about used ones. I took apart a knuckle at the junk yard and that guy's birf looks fine. 180k mi, original size tires, no obvious signs of wheeling... As for the post "do something to the other side," forgive a fng, but why? Is it a given the other side is bad too?
Additionally, why the heck would they change the drive plate?
 
If you know what to look for in aused birf, that might work. The wear signs aren't going to jump out at you though. The balls wear small indentations in the bell, and eventually one of the balls get stuck in the indentation while turning and the birf grenades.

You should change the other side because it was (not) maintained in the same manner as the one that broke. It's most likely worn as well, and is a ticking bomb.

Your CDL switch probably works fine. The truck probably wasn't able to overcome the binding of the grenaded birf. Did you hear grinding, or did the truck just not move? Did the motor rev up, or did it bog at 1800 RPM or so? If no grinding, no movement, and no motor revs, the CDL was doing its job and the motor was trying to turn the broken birf, but the pieces and parts of the birf were bound up. Shifting to low range would have given the motor enough torque to shred the broken birf parts out of its way and allow the truck to move.

-Spike
 
Oh come on, you're not that far from Corvallis!


Ha ha, you should read "Dies the Fire" by S.M. Stirling. That whole series puts an entirely new perspective on how I imagine that part of the U.S to be. (Nothing bad, its a alternate history/science fiction type deal.) Man, that birf was trashed. Mine just stripped the drive flange. And the birf splines... :(.
 
Back
Top Bottom