Newb from Texas!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 20, 2009
Threads
48
Messages
680
Location
Austin, Tx
Hey all. Just wanted to introduce myself. (Mods if this is in the wrong spot, feel free to move it. I looked but didn't really see and introduction sticky, but then again I may just be blind.)

I just accquired a 94 Cruiser, factory locked, leather so on so forth. 193k miles. Seems to run great, except for a small idle issue ( without a/c on) and the non-functioning fuel gauge ( already researched that problem). This will be my second cruiser, first being a 71 FJ-40. I got the 'Yota strictly as a toy/mild DD. (BTW the first thing I did was get rid of the factory running boards and mud flaps...so if anyone wants them ;) )

I am kinda new to Toyota tech, but I am an avid offroader. (Me and a buddy has an 86 Chevy 3/4 ton, has Rocks, 44" Boggers, rear steer, 6BT 12V Cummins, etc, etc.) I have had several lifted, locked rides and look forward to see if the 80 can handle everything I throw at it.

For now I think I am going to go with the OME 5" Comp kit, and a set of 35" somethings. Haven't quite decided what I want yet. I am going to try and steer clear of an ARB bumper, just because I want to build all my own body armor. But that is subject to change. :doh:

Anyways I do have a few questions about the front axle. Such as axle seals leaking and best place to get parts. Did some searches but didn't quite find what I was looking for.

Anyways, bad ass site so far. I am a member on several other sites, and this and Pirate are the most informative.

:flipoff2:

D







 
Welcome! :flipoff2: (Official Mud Welcome)

There is an 80 series registry at the top of this page, wherein you can show off your new ride.

If you start to build your own armor, make sure you document it; then sign up for ROTF (Rig of the Fortnight).

You have a nice starting point with the Cruiser, of course. Good choice! :cheers:
 
Thanks. I will do that.

I am curious. Where can I find all the specs. Like what tranny, gears, yada yada. Fluid capacites? I hear of 2 different engines and I am unsure of which come in what years and what is the differences between the years. If someone could shoot me a link or a thread, that would be greatly appreciated.

D
 
Thanks. I will do that.

I am curious. Where can I find all the specs. Like what tranny, gears, yada yada. Fluid capacites? I hear of 2 different engines and I am unsure of which come in what years and what is the differences between the years. If someone could shoot me a link or a thread, that would be greatly appreciated.

D

The FAQ has a lot of information (at the top of this forum).

Check Sleeoffroad.com for differences in model years. While you are there, look at all of the possibilities for your rig. :cheers:

EDIT: The link to Slee's site explains the differences between the years: '91 -'92 and '93 - '97 being the biggest differences ('91/'92 had a 3F-E engine; '93-'97 have a 1FZ-FE).
 
Best place to get OEM parts is either from Cdan or gotmud. Search for their usernames. Oh yeah, welcome to the never ending addiction.:D
 
I know that they are pretty big with 3" but are they as capable with only 3" ? I would like to eventually do trimming and run 37's. Like I said I have a bigger toy that stays strictly in the rocks. I want something more trail oriented that isn't so big it won't fit in one lane on the highway. 0.o

And 35's on a stock 80 looks kinda funny to me. Just my .02$.

Oh and the bad part is I already have enough addictions, between my M35A2 I had and the 11 sec Camaro I have, I have enough . LOL

Thanks,

D
 
Here is a '91 with 35's, 2.5" OME with .5" spacers in the front, for reference sake:

attachment.php
 
Here is a '91 with 35's, 2.5" OME with .5" spacers in the front, for reference sake:

That looks good and all, don't get me wrong, but I think it looks a bit goofy with 35's on it. This is what I am used to... :D
rear2.jpg
 
If ya'll saw that...oops. lol
 
welcome to texas, eh?

Maybe you should have gotten a jeep?

I wanted and ZJ or XJ, but also knew how capable Yotas were from owning 2 previously. So opted to go this route. I mean I am not a pro or anything with 80s by any sorts, just assumed 35s and 5" of lift was more capable than 35s and 3" of lift. If I am wrong that is fine. Thats what I am here for. To learn. I am just not too fond of big tires and little to no lift. Thats just me.

D
 
I love that look. I think it is plenty tough. Not much you cant do.

Agreed.

Ihasfip: Check out some 80 series Land Cruisers wheeling on Youtube, and see if they are not capable. Not only capable, but comfortable (I get to say this since selling my '66 FJ40). :D
 
I love that look. I think it is plenty tough. Not much you cant do.

I agree that looks tough. But looks and performance are two different things. That why I was wondering which performed better? And with J's if I add bumpers, and sliders and the such it will probably sag a bit will it not? The whole LC thing confuses me with all the OME heavies and meduims and this and that. LOL. Not just a 6" set of springs like I am used to. First think I have ever had that didn't have leaves under it.

D
 
I agree that looks tough. But looks and performance are two different things. That why I was wondering which performed better? And with J's if I add bumpers, and sliders and the such it will probably sag a bit will it not? The whole LC thing confuses me with all the OME heavies and meduims and this and that. LOL. Not just a 6" set of springs like I am used to. First think I have ever had that didn't have leaves under it.

D

I always had leafs as well, which is why I like the ride in my 80 so much.

You are right in wanting a taller lift for the type of wheeling you will do with it, and it wheel/ look great.
 
Back
Top Bottom