New transmission/transfer case problem?

[john0089]

Will a stock 1975 fj40 transfer case work with this transmission? (I do have a 350 chevy in my fj40)

http://cgi.ebay.com/ebaymotors/ws/e...&item=7945733110&rd=1&sspagename=STRK:MEWN:IT

There it looks like there is an adapter or something on the end of the tranny.

http://www.mindcrater.com/Galleries-2004/Gallery_24Jan04/pages/ShopKam01-24-04-27.htm

 

[Poser]

Not without an adapter.

Advance Adapters and some others offer adapters for making a Toyota Land Cruiser transfer case work with many automatic transmissions...


Start reading here about adapters....


http://www.advanceadapters.com/catalog/060.html





Gosh,

That second link looks very familiar…



-Steve

 

[john0089]

Sorry for asking a repeated question...I just had to make sure!

THANKS

 

[Poser]

No worries man...


Where did you find that second link?


Good luck!


-Steve

 

[tornadoalleycruiser]

Cheapest way to get to a crusier case from that tranny is a 203 doubler. You'll be about $500+ out on one plate adapter and get a doubler at the same time. Otherwise you have the spacer adapter with a spud shaft which is about the same length as the 203 but no reduction box.

 

[Paul_A]

I run a th350 and I wish I had used a NP203 doubler instead of an adapter housing. Much, much better idea! I plan on retrofitting to a doubler one day.

 

[john0089]

I will look into both options.


If anybody has any more suggestions just tell me.


THANX