Longtime troll and finally able to purchase one. .
New to me **2003 Toyota Tundra Limited Access Cab 2wd (Couldn't find an affordable 4WD)**
Purchased from original owner with 96k miles and not a spec of rust on the underbody or frame. Totally a southern truck.
Have a long list of upgrades I've got planned: (Certainly the wife will not be happy)
Replaced all the dashboard lights which were either dim or burnt out. Stuck with stock bulbs from Toyota (Lame I know)
GTR Ultra 2 LED bulbs (Fog Lights) - Added already Bright as heck and get flashed once in a while.
Added the CURT Trailer 7 way / 4 way PIN - Added already
Baja bar - Added already (Toyota Tundra Light Bar (2004-2006) #51051)
ScanGauge Mount - Added already (https://spikerengineering.com/product/scangauge-mount-01-15-tacoma) Fits perfectly on our 1st gen Tundra (Highly Recommend)
Rigid Industries 360 Series 6 inch (360-Series | PAIR) and the damn harness which was sold separately
Rago Fabrication - 1st gen Tundra ditch light brackets (2000-2006 1st Gen Toyota Tundra/1st gen Sequoia Ditch Light Brackets)
Kenwood DMX907S Double-din head unit
Kenwood Dash-cam DRV-N520
Kenwood CMOS-320 Backup Camera
Polk Audio DB6502 6.5 inch components speakers (Front)
Steering Wheel Control Interface (ASWC-1)
Not sure about the next few options so I'll ask you guys which might be a more useful and aesthetically pleasing
1) Baja Designs LP6 Pro (Amber) - Expensive since each light is like $500 each and I have to buy another harness separately
or
Diode Dynamic SS3 Pro (Amber)
2) Add LEDs to the current headlights housing
or
HID Retrofit
3) Have seat covers
or
Fix the tired (not cracked) leather seats
Anyways, share your thoughts.
AK
New to me **2003 Toyota Tundra Limited Access Cab 2wd (Couldn't find an affordable 4WD)**
Purchased from original owner with 96k miles and not a spec of rust on the underbody or frame. Totally a southern truck.
Have a long list of upgrades I've got planned: (Certainly the wife will not be happy)
Replaced all the dashboard lights which were either dim or burnt out. Stuck with stock bulbs from Toyota (Lame I know)
GTR Ultra 2 LED bulbs (Fog Lights) - Added already Bright as heck and get flashed once in a while.
Added the CURT Trailer 7 way / 4 way PIN - Added already
Baja bar - Added already (Toyota Tundra Light Bar (2004-2006) #51051)
ScanGauge Mount - Added already (https://spikerengineering.com/product/scangauge-mount-01-15-tacoma) Fits perfectly on our 1st gen Tundra (Highly Recommend)
Rigid Industries 360 Series 6 inch (360-Series | PAIR) and the damn harness which was sold separately
Rago Fabrication - 1st gen Tundra ditch light brackets (2000-2006 1st Gen Toyota Tundra/1st gen Sequoia Ditch Light Brackets)
Kenwood DMX907S Double-din head unit
Kenwood Dash-cam DRV-N520
Kenwood CMOS-320 Backup Camera
Polk Audio DB6502 6.5 inch components speakers (Front)
Steering Wheel Control Interface (ASWC-1)
Not sure about the next few options so I'll ask you guys which might be a more useful and aesthetically pleasing
1) Baja Designs LP6 Pro (Amber) - Expensive since each light is like $500 each and I have to buy another harness separately
or
Diode Dynamic SS3 Pro (Amber)
2) Add LEDs to the current headlights housing
or
HID Retrofit
3) Have seat covers
or
Fix the tired (not cracked) leather seats
Anyways, share your thoughts.
AK