New Starter Contacts Install

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 5, 2003
Threads
110
Messages
1,847
Location
Sacramento, California
Website
www.instagram.com
With almost 190,000 miles (304.000 Kms) they were bound to start failing any time. And they did. With the help of Cruiserdrew, I was up and running in no time.
Here is a report and some pics.

IMG_2967.jpg


Old worn contact.

Regards

Alvaro
 
Doing mine right now along with fuel filter, oil change, PHH, plugs, wires, rotor, cap, pcv and misc hoses. Got a long night ahead!:beer:
 
Looks a lot like mine! (granted it's off of a 3FE)

Old...
Starter_10.JPG


New...
Starter_17.JPG
 
Just did mine 4 days ago, piece of cake!

'cept that dang top bolt!

Hey, I got new tools out of the job, yeah!

:cheers:
 
It was pretty cool that the local dealer had all the parts I needed to do the job.
Normally I would have order the parts from CDAN, but this time I needed them right away.

Regards

Alvaro
 
It was pretty cool that the local dealer had all the parts I needed to do the job.
Normally I would have order the parts from CDAN, but this time I needed them right away.

Regards

Alvaro

Lucky... My local dealer stocks nada for cruisers (period) no matter what year. The parts guys are nice when they tell you they don't have something though.

However the tech's threw me for a loop. When I described the starting problem to the tech in the parts office, he told me to clean the key hole in the ingnition with......., get this,.......... WD40:confused:

Had to order from Dan anyway to get some oil filters.

As usual, as soon as I hung up the phone I remembered something else I would have liked to order:doh:
 
My Mom's Lexus was having the same issues and after a week at the Toyota dealer and three days at the local shop, no one could figure it out. She called me to ask for some help and we had a new starter ordered from Toyota and in, in a few hours. It also needed a new rad hose, gaskets and two new intake gaskets. That thing was a real pain compared to a cruiser. Buried deep in the bowls of the engine bay.

The dealer would not order the plunger and contacts for the job. Rebuilt starter only. Asshats!
 
Rookie,

I'd would agree. However, the way I see it is that if I have everything a part, it would be a crime putting the old parts back together.
If I was doing a trail fix, cleaning and prepping them would be the way to go. But having all the new parts available, there's no reason not to change them.
Besides, now that they have been changed, it will take another 5 years for them to fail.

Regards

Alvaro
 
Rookie,

I'd would agree. However, the way I see it is that if I have everything a part, it would be a crime putting the old parts back together.
If I was doing a trail fix, cleaning and prepping them would be the way to go. But having all the new parts available, there's no reason not to change them.
Besides, now that they have been changed, it will take another 5 years for them to fail.

Regards

Alvaro

Oh, no doubt. I think typically we would expect at 190k for those to be worn down to the nubs. I wasn't suggesting you reuse them after having it apart. Although you could clean them and the plunger up and have them around for trail spares. Mine had similar amounts wear at 75k when I PM'd them, but once you've got it apart and the new ones are sitting there, you gotta put'em on :D.

:beer:
Rookie2
 
Back
Top Bottom