New guy with frame questions...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 27, 2005
Threads
9
Messages
17
Location
At the moment North Jersey
Hey everyone, My name is Matt, I'm from New Jersey, and I just signed up here. My '77 FJ-40 has been off the road for quite a while now, but I'll be graduating from college next year so I'm getting the itch to get it back on the trails. I'm sure I've talked to some of you guys before on the LCML, I'm still on but I only read it once in a while. Anyway my truck has definitely seen better days-the tub is pretty much shot, the frame is getting there and the engine needs to be rebuilt, but with the help of a few other cruiser heads (and a real job next year) I'm sure I can get it back on it's feet. So what better place to start than the frame?

While I still actually had time to 'wheel and wrench on my truck I bought a basketcase of a project off of a guy who had it sitting in his backyard for years. It was an FJ-40 of various years with a hackjob V8 conversion all cobbled together on top of a spring over that would give you nightmares. Thankfully this thing never saw the road, but I picked it up for almost nothing, sold the V8 adapter and associated mounts along with the running gear and doubled my money. Now I'm left with the frame and axles trying to figure out what to do with them.

Like I said, my frame is in sorry shape and would most likely need the rear section (The rear channel, gussets, and the rear portion of the siderails) replaced as the rust has gotten VERY bad. My idea was to strip the frame I have totally, do any minor repair work/strengthening, have it galvanized (I talked to a place in Newark that agreed to do it for around $400), and start my buildup on that. The only thing I'm afraid of is that this frame might be somehow tweaked/bent/etc...especially since the yahoos that were working on it before didn't seem like the sharpest tools in the shed. Is there any easy way to determine if the frame is in fact ok to use? Of course I'm even considering totally reconstructing the frame using parts of the original along with tube and steel channel to end up with something like this:

Tube Frame

With the help of my machinist/welder friend Tim (He used to repair airframes among other things when he was in the service), and my buddy Jon who has the shop space and tools at his farm we could tackle the necessary work/fabrication, but would it really be necessary? I do want a good strong frame that will last (hence the galvanizing), but I doubt I'll ever be doing any remotely hardcore rockcrawling, etc...More like trips to Island Beach State Park, the Pinelands, and the occasional jaunt out to Paragon Adventure Park. So should I just reinforce the frame as is and go with it? If so how can I make sure that I'm not basing an entire project on a frame that's out of whack? Any help you guys can give me is greatly appreciated.

Thanks,

Matthew
 
There's a frame chart in the tech links that you can use to check the measurement between all the body mount points. It won't help if the frame is bent over the axles or if it's twisted. You should be able to check with a level if it's twisted. My frame was bent over the front drivers side axle. It looked fine but the steering box was 3" out of alinement with the hole in the firewall. I got a replacement frame from cruiserparts.net for $600. I've got a slightly tweaked 74 frame if you need any parts. I'm in PA so it's not too far.

Kevin
 
Looks like a long, expensive, labor intensive project. Don't want to be a buzz kill, a kill joy, a nay sayer, a Sad Sally, or a Negative Nelly. But since time IS money, sell the rig for what you can get out of it or keep it for parts and buy one that is running and wheelable now. Enjoy it this summer, not in 2012. Put more time into work/career and end up financially ahead, too. You said body, engine, AND frame is shot. You are talking $$$$$$ and timetimetimetime. You can pick up an OK looking, good running rig for 5 or 6 k. Maybe even one with a little lift, 32s or 33s, maybe a locker. Watch, wait, and pounce when the right rig comes up. Just my unsolicited .02.
 
DocB said:
Looks like a long, expensive, labor intensive project..

I know, I've thought about it a lot, but for two reasons I want to go with the truck I have. First, I bought it when I was 15 with paper route money-no lie...lol It was my first car, first 4 wheeler, etc... Also, at one point when I really figured it was the best thing to do I tried to sell it and didn't really get offered much. Anyway, this summer I'll have some free time so I'll really figure out just what I want to do I guess.

Later,

Matthew
 
Well, you didn't tell me it had sentimental value. In that case, GET OUT YOUR WALLET!!! Here's my '77, for which I've got out MY wallet over and over. The most important thing: HAVE FUN.
 
Back
Top Bottom