New Guy Intro and Help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Sounds like there is a bit of confusion between relay and fuse. The fuse is indeed quite easy as Beo says; I haven't tried the relay myself. Which one do you want out?
 
SORRY! It probably would've helped if i looked in my owners manual. I was just looking on the fuse box cover and what i saw with EFI on it, is I'm guessing the relay. I know what fuse to pull now, thanks guys.

Also where can I get a FSM, i'm here in Germany so I can't really get one from a Toyota Dealership here. Is the only place on the toyota site for download or is there somewhere i can buy a hardcopy online?
 
You can buy a hard copy of the FSM and the EWD (the 2 manuals you should have) from the Toyota Materials Distribution Center (MDC). They have an 800 number and the information has been posted several times before. See if you can find it here in the 80-section and if you are unsuccessful then post back and someone will assist you with the search.
-B-
 
Thanks Beowulf for the help. I found the Toyota Materials Distribution Center number through the search and I think i may have found what cause my CEL. When i was pulling the EFI fuse i was looking at the VSV and noticed that one of the Vacuum lines was off. Have yet to drive but have to go get my brother from work here in a few and we'll if it comes back on.
 
I think i may have found what cause my CEL. When i was pulling the EFI fuse i was looking at the VSV and noticed that one of the Vacuum lines was off.

This is the reason that we always tell people with a P0401 to check the hoses and wiring first. It is usually not as simple as a hose that is off the nipple but some people want to go out and buy EGR valves and temp sensors before they even check the hoses. More often, it is a clogged or cracked hose. You may have gotten lucky. :D

-B-
 
Back
Top Bottom