New drawer system being developed.

[hawkeye]

This system will be for fidges.

https://forum.ih8mud.com/80-series-tech/288118-new-fridge-specific-drawer-system.html

 

[teejnut]

Cool! Just curious how high would the fridge be with your current drawer system?

 

[Brentbba]

Looks like you'll have the fridge at 'ground' level if I'm eyeing the frame correctly?

Dave could provide you some great feedback on height issues re the fridge. He's got his mounted on top of drawers. I do not. With Jeff Kaufman back in the picture, I'm debating adding the PS drawer to match the DS. Two issues. One is whether my CO2 tank mount will get in the way and two, will the fridge be too high to be user friendly, even with a slide. It's that later issue that I'm most concerned with. I rarely use the slide becaue the fridge is accessible on the floor of the back.

 

[hawkeye]

The DIY system sits 9" off the floor. This system I plan to have two options. Option one will have the fridge sitting 1.5" off the floor. The second option will be to have the fridge setting about 5.5" off the floor, this will allow for a shallow tool drawer under the fridge.

 

[hawkeye]

Brent,
I guess it depends on how tall you are Im only 5'8" so with 35s Its already hard to get back there.

 

[Brentbba]

Small Tool drawer is an interesting thought!

Sheez, at 5'11" on 33's with a 2.5" lift it's bad enough. hehehe

 

[hawkeye]

Yeah I think the tool drawer will be cool. It will be removable like Kaufmens drawers are. It will also have a lid so that it will double as a small table.