New 4" Lift

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 12, 2006
Threads
164
Messages
1,226
Location
Ladner, BC, Canada
Website
www.lentelconstruction.com
very nice looking
 
looks pretty leveled .. are you planing to run 315 .. ?

I am really happy with how it looks. I don't have plans to go from the 285 to 315's. If I did I would do the gearing as I did in my old BJ60. Also it's the wifes daily driver. Any higher and she will loose interest in it quickly having to lift up a 4 yr old and a 2 1/2 year old.

As for the vibe...I've been told to grease the slip yoke and see if there is some play in it. It's not major but I do know it (vibration) is there.

Slowly (5-6 years) we will get it ready for a drive to Latin America with the kids.
 
Just a question...why did you lift it so much (4" compared to 2.5") if you aren't planning on increasing your tire size. It seems all you did is make the center of gravity for your wife's truck higher than it needs to be. I am not trying to be negative here...just trying to figure out your rational. If you were planning on going to 35" tires and needed the extra room...I could understand. If you are doing serious off road driving and need the wheel travel...I could understand. But, seeing how you said this is a daily driver...I am not seeing the benefit of lifting it 4" and decreasing the safety of the vehicle for no real reason. Anyway, it would be interesting to know your rational.

- Mark
 
Just a question...why did you lift it so much (4" compared to 2.5") if you aren't planning on increasing your tire size. It seems all you did is make the center of gravity for your wife's truck higher than it needs to be. I am not trying to be negative here...just trying to figure out your rational. If you were planning on going to 35" tires and needed the extra room...I could understand. If you are doing serious off road driving and need the wheel travel...I could understand. But, seeing how you said this is a daily driver...I am not seeing the benefit of lifting it 4" and decreasing the safety of the vehicle for no real reason. Anyway, it would be interesting to know your rational.

- Mark

My previous rig (1985 BJ60) had a 2.5" lift in it. I found it was barely enough on some of the harder trails I've been on. I was still hitting the rear end here and there. Granted I don't do a lot of extreme wheeling, I have really wanted the extra height in past trips. I also talked to a few guys who have done other trips I am interested in such as Rubithon, and I was told 2.5" most likely isn't enough for that trip. I now have the option of going to a larger tire for specific trips if I choose to do so.

So far I find the truck handles great on the pavement. My wife enjoys driving it so I am sure I made the right choice. The sales person i spoke with at Man-a-fre talked me out of the 5" lift thankfully.

The yellow bus beside me is a Man-a-fre 6" with a 4" body lift running 315's. I don't think mine looks too bad beside his.
4 inch lift 006.webp
 
the "bus" looks goofy in my opinion... yours looks much safer and allot well on its way to becoming a beast. I only had the MAF 4 and I as running 36in iroks it was pretty gnarly off road just needed some gears...
 
Last edited:
It's the competition lift, so I am not sure if they are a J coil.

competition are 3" ( OME818 / OME421 ) 4" ( 419 / 422 ) or 5" ( 420 / 423 )
 
Back
Top Bottom