Need Help!!!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 7, 2018
Threads
7
Messages
254
Location
Cypress, TX
Good morning MUD,

Long story short, was driving to work this morning and heard something snap. Didn’t think nothing of it maybe debree on the road but then almost all my lights came on immediately after that snap noise. Then the truck temperature started to rise. Any advice/ suggestions would be greatly appreciated. Thanks in advance. By the way I have 92 HDJ81 80 series 1HD-T completely stock.
 
1900081
 
Your waterpump and alternator belt looks like it broke. Did you check that??
 
Your waterpump and alternator belt looks like it broke. Did you check that??
Thats what I would have my money on as well, you can see the voltage is down as well.
 
All those dash lights came on after you heard the snap? That certainly points to the alternator.

These trucks have dual alternator belts...even if one snapped you should continue to have a functioning alternator. Interested to hear what you find.
 
All those dash lights came on after you heard the snap? That certainly points to the alternator.

These trucks have dual alternator belts...even if one snapped you should continue to have a functioning alternator. Interested to hear what you find.
Yes you are correct. I did have a functional alternator because the truck still had power and was able to turn it off and on. I did see that I’m missing two belts so like the guys mentioned above the other was most likely to be the water pump belt because that’s why the temperature started to rise. Once I saw that I immediately shut the truck off.
 
I will send pictures first thing tomorrow before I touch anything to get your guys expertises on this. Thanks in advance!
 
Yes you are correct. I did have a functional alternator because the truck still had power and was able to turn it off and on. I did see that I’m missing two belts so like the guys mentioned above the other was most likely to be the water pump belt because that’s why the temperature started to rise. Once I saw that I immediately shut the truck off.

You would still have power as your truck still has a battery, you could theoretically run for a while as long as you had enough voltage to the fuel solenoid
 
From the looks of it obviously that belt that survived that is currently on looks very bad as well. I just got a belt from a very great guy and friend from here on the forum and he is getting me the other belt by this upcoming week. I should only need two belts correct or three not including the timing belt? I’m not sure which direction they go because they snap but I’m going to try to look at the manual to see if it has which belt goes on which pulley. Thanks in advance guys.
 
You need a pair of matched alternator belts, and an AC belt (the one still intact, but showing bad wear). You'll also want to check all your pulleys and make sure nothing's seized as it's very unusual to blow both alternator belts at the same time like this, and there's likely an underlying reason for it.
 
Agreed with Ian above.

You need a matched pair of belts for the alternator, not simply two the same size.
And you're best bet is to also replace the AC one that is still there, you'll need to take it off anyway to fit the others.
 
Back
Top Bottom