Need help with birf replacement asap

[TxCruzr]

I got the busted birf out but now I can't get the shaft out. There isen't a clip holding the shaft in is there? What am I missing or doing wrong? This is on the short side and I have a lockright if that makes a difference. The birfield inner cage is stuck on the shaft with the clip behind it but I don't think that matters untill I get the shaft out.
Thanks

Joseph

 

[Pin_Head]

There is nothing holding it in, but the splines may be wedged into the side gears. You just have to get manly with it. Prying it back and forth sideways may help loosen it up.

 

[woody]

d'oh....misread the post, my reply on PBB will make zero sense...

rotate the pinion as you pull the inner free...sometimes things bind a bit and this will help free them up.

 

[TxCruzr]

Ok...thats taken care of....next newbie question.
I'm ready to put the longs and shaft together. How do I get that inner clip onto the shaft while its in the longfield. The longfield is tight and I can't rotate it any. Is it ok to just run the outer c clip or do I need the inner clip and outer clip.
Thanks again

 

[TxCruzr]

Cancel that order. All is going smooth now. I want a d60 though