Need help installing interior window seals...

[CarneLoco]

Just picked up some door weather strips if anyone has a quick video or can explain that would be much appreciated

 

[CarneLoco]

The ones with the white clips are the exterior these are the interior and my vehicle didn't come with them from the previous owner so I am working blind here is a close up from the back side

 

[cruiserdan]

Remove the old ones without breaking the little white clips. Reuse the little white clips if you did not get new ones. Clip new weatherstripping back in. That's what I did, and it was a pretty simple job.

This is true for the outer ones, he is working on the inner ones.

In order to replace the inner strips you will need to remove the door panels and then straighten out the tabs that are bent over to secure the strips to the door panels. Fit the new strips by lininng up the holes in the panel with the tabs on the back of the strip and then bend the tabs flat against the panel.

 

[cruiserdan]

The tabs on your new strip have been bent over so you will need to carefully straighten them out in order to fit the strip.

 

[blbuck12]

@CarneLoco Where did you get the interior window seal? I'm in the same boat as one of my doors is missing it.

 

[cruiserdan]

Available new from your local Toyota dealer.

 

[CarneLoco]

Thanks guys I'll give that a try it is what we thought but wanted to make sure @blbuck12 i got it from cruiserparts.net had a bit of trouble getting them they have a young lady that took my first order and sent me the wrong parts(I have seen a few other posters say similar things when dealing with her) but called them back and they were able to get me the right ones

 

[blbuck12]

Good to know. Is 68170-90a01 the correct part number you got?

 

[CarneLoco]

Good to know. Is 68170-90a01 the correct part number you got?

 

[blbuck12]

@CarneLoco is the 68190-90A01 for the back windows? I called a local dealership and they said either side was the same part #.

 

[CarneLoco]

@blbuck12 that is correct