Name those parts ...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 28, 2007
Threads
10
Messages
83
Location
Knoxville, TN
So while waiting on my valve shims to arrive (part of ongoing HG job), I took stock and have these parts that I cannot identify. Most came in the valve grind kit I got from Dan, w/ exception of the o-ring, hose, and bolt which I ordered as line items and now can't remember what they're for (it's been a long 2 weeks). Can you help ID what they are?

namethoseparts.jpg
 
1 & 2 do not apply to your 97. The rest look familiar I just can't think of them right now.

Is #5 the bolt to hold the gears on the intake camshaft from spinning?


#4... these ones seem real familiar, maybe related to injectors?
 
Those are "starter" parts for your misc. parts bin, where you would put extra pieces from former projects until you have enough extras to build another project!;)
 
Good call on #3 (o-ring) ... I just looked at the distributor (still on bench) and the old one is obvious.

RE: #4 (washers), if those are for the fuel filter, wouldn't there be only 4 of them? Or maybe in some cases Toyota packs some extras.

RE: #5, the one for the cam gear is accounted for, so this must be something else. The fact that it's got no oil/dirt/engine grime on it seems like a good clue.
 
Oh, and #6 is by all appearances some kind of heater hose (albeit a small one) ... I'm just hoping it's not some obscure one back by the firewall that is no longer accessible now that I've got the head and intake back on.
 
Ok, 86 the bolt ... it had crept onto my workbench from somewhere else. So the only unidentified players remain:

#4 (washers) ... maybe fuel filter / rail, but the washers on my filter look quite a bit thicker than these, and I don't see where they would go on the rail

#6 hose

Thanks for the observations.
 
#6 is one of the bypass hoses, the one at the front of the motor by the thermostat housing.
 
Or if you are not paying attention to exact length, it also works for the hose on top of the throttle body. I used this one there first after cutting it,then realized the other one was too short for where Dan described. Trip to NAPA.:doh:
 
Last edited:
And careful with those fuel filter banjo washers (#4). They are not magnetic, so if you drop them, pray they hit the floor.....
 
This makes me wonder if I am the only one who always has "extra" parts/bolts left over after a rebuild/repair. My Dad and I always used to kid about it but it seems like anytime I do a big job there is always something unaccounted for! The strangest time was when my A/C quit working on my 94, I pulled the control panel off, took it apart and something fell out. I never found whatever it was so I put it back together just knowing I was going to have to take it somewhere and pay to have it fixed. I put it back in and it worked! I have never had any problems as a result of these "extra" parts, maybe I have just been lucky so far!
Rusty
 
Back
Top Bottom