n00b from N.H.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 2, 2006
Threads
3
Messages
34
Location
Live Free Or Die
Here's a picture of hopefully my winter project,its a '79 that has been restored once before but needs some freshing up,especially the interior componets.I was thinking about a lift kit and really need to be schooled on them.It's kinda rare as it also has factory air but thats not currantly working.:frown:
fjfrt.jpg
 
Here's a picture of hopefully my winter project,its a '79 that has been restored once before but needs some freshing up,especially the interior componets.I was thinking about a lift kit and really need to be schooled on them.It's kinda rare as it also has factory air but thats not currantly working.:frown:

If your thinking of turning that fine 40 into a non-stock vehicle you might want to think twice...It looks to be in good shape and if so you could freshen it up (i.e. get rid of the black hinges etc) and sell it then start with a less pristine example to mod up...Search for some posts by AATLAS1X for examples of some FINE stock FJ40s that he has found, freshened up, and sold for huge sums of $$. Pristine rust free stock 40's are getting more and more rare.

Just a thought and definitely post up more pics!! :)
 
Yes its in good shape all metel no diamond plate or aftermarket tub,It needs attention with the suspension as the l.r. sags and the body mounts are dry rotted and splitting real bad.My wife wants to wheel it and we've battled about it as I told her i'll cry on the spot if it gets trail damage.:crybaby:
She will never sell unless I sold my classic chevy and that ain't happening. ;)
 
Nice rig, especially around here. Wheeling that rig (IMO) would be a huge mistake. So would selling it.
Buy a mid to late model rot box,lock it, spring it over and beat the snot out of it. In N.E., the trails are so tight that damage is inevitable.

My 40 was beautiful at one point, now the wife will not even get in it.

Check out the FAQ thread, and the tech links for all info that you need. There are a lot of fj40 guys in NH and VT that can help with info, supplies, labor and parts if you need it.
 
Welcome to MUD:flipoff2:

Nice cruiser.


It's not too pristine or original to modify and wheel. Do what you want to it and ENJOY IT.


I 2nd the call to lose the black hinges and funky turn signals. Get some stock mirrors too.

Old Man Emu makes a great lift. Look in the FAQ section for more info on lifts.

A slight lift won't change the looks too much and will help the ride quality while allowing you to put some slightly meatier tires on it.


Good luck with your build up.
 
Welcome to Mud. Its nice to see a clean FJ40 in New England. I'm down in RI. If you are thinking a lift kit and only want and a mild lift check out the OME lift 2.5". It will allow you to fit 33" tires. Cruiser Solutions in NH has them at a good price and you could pick it up and save on shipping. Plus Tedd is a great guy to deal with. Also check out the Yankee Toys group. I have wheeled my stock Tacoma and if you run the stock trails you don't really have to worry about body damage. Maybe a few scratches that need to be buffed out.
 
That looks pretty clean for a all metal rig in NH. I'm in NH as well, and have an aluminum tub on mine. Absolutely do not drive this thing after they salt the roads. Depending on how hardcore you want to be with off road use, you could make this rig quite capable without cutting it up. Granted I don't wheel mine very hard, but it's pretty amazing where it will go with open diffs , about 3.5 inches of lift and 33 inch all terrains. I will second Tedd being great to deal with. I've bought a few things from them on the second round of my restoration. And the last owner of my truck spent a fortune with him and had nothing but great things to say.
 
I agree the black hinges are gone along with the chevy mirrors,also I want to get real bumpers with tow points on them back on it.I've already been to cruiser solutions once as its not far from home and next time will take the wife as they have the con-ferr boxes she likes.But only if we don't put a winch on it.Any thoughts on using a B.D.S. lift kit besides OME.I have more access to trails in N.H. then the avg. wheeler as i'm with the NEA4WDC.Thanks for the compliements and tonite the wife will be searching the forums here and adding her 2 cents.
 
like everyone else says, lifting that rig could be a mistake. If you bother it the value will decrease very quickly......"freshen it up" keep it, sell it. but don't molest it, it is a beauty.

lunyou
 
From what I have heard the BDS kit is a good kit. I am still up in the air as far as what I want to do. If its going to be a 2.5" I am going OME. If its a 4" kit I am going HFS. I have heard that the BDS and HFS springs are made at the same place. I like the fact that the HFS are a little longer and keep a better shackle angle.
 
I agree the black hinges are gone along with the chevy mirrors,also I want to get real bumpers with tow points on them back on it.I've already been to cruiser solutions once as its not far from home and next time will take the wife as they have the con-ferr boxes she likes.But only if we don't put a winch on it.Any thoughts on using a B.D.S. lift kit besides OME.I have more access to trails in N.H. then the avg. wheeler as i'm with the NEA4WDC.Thanks for the compliements and tonite the wife will be searching the forums here and adding her 2 cents.

Yankee Toys is doing a couple of stock runs in the near future (sunday ) and again in a few weeks, get on our e-mail list for details.
www.yankeetoys.org

Lane
Swanzey nh
 
Yes i'm on neow(mikesmaxx,but I hardly post there) and i'm in the Raymond area.The fj isn't ready for a run at all right now needs brake hoses and a good bleeding but i'll look into the Yankee Toys website.And just for the record I founded NEZR2 which is part of the same group your in ;) .The the wife might want to join once the fj is up and roadworthy.She read all the posts tonite and can't believe more people sided with me then her on trailrunning it. :D
Last teaser pic for awhile.
fjtrans4.jpg
 
Are you actually in Raymond, as I am as well. Hard to believe you found something that clean up here. Have a project 40 I just can't seem to get to. Leaping Deer has been up and seen it. GOod place to start but I want to tear it down to the frame. It's day will come.
 
I talked yesterday with the yankee toy rep after the meeting,nice guy and we're on the mailing list now.The wife bought the fj down in R.I. about 6 years ago sure your correct it wasn't found up here.Its been garaged for the last 2 years and this winter I hope to finally get to it.
OldIron you got a pm.
 
Back
Top Bottom