my first fj40

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 7, 2010
Threads
7
Messages
33
hi guys newbie here... i thought i'd post up some pics of my rig. i'm in the final stages(i know it will never truly be done) i put in a 5.3 ls motor, 4l60e trans, mated up to a stock fj40 case. i've got a lot of useful info from this site.



 
I would love to see more pictures and details of the front and rear seats. Nice looking rig and like the headrests front and rear from what I can see.

I Will post up some more pics.
 
congrats, enjoy.
 
Here are some pics of the seats. they are made here in phoenix by a company called triple x. they make a lot of seats for sand rails and utv's.



 
So is it 4 matching seats, two up front two in the rear. Do the ones in the rear sit between the wheel wells or do they sit above them.
the fronts are buckets and the rear is a bench. they make the seats to whatever width you like. i did mine so they sit on the fender well. that way my kids have a little more leg room. also the rear has armrests with built in cup holders.
 
So i finally got some time to take the cruiser out for her first offroad venture(at least with me.) i was pretty impressed with how it handled. not many pics but i did take a few poser shots.
IMG_20110130_134857.jpg

IMG_20110130_134825.jpg
 
Last edited:
so i decided start stage 2 of my build. i just installed a narrowed dana 60 on the front, converted to 6 lug, next up my atlas t/c, and narrowed 14 bolt.
IMG_0244.jpg
 
Killer rig, great seats...now get it dirty :D
 
Just finished mounting the Atlas and 14bolt. i really like the new stance. it definately feels really stable. now i just have to get it in the trail!
IMG_0321.jpg

IMG_0324.jpg

IMG_0326.jpg
 
What is the width of the axles? Nice work, really good looking cruiser. I am about to start looking for a 14b to work on for the back of my cruiser. Where you located?
 
I'm in phoenix. thanks for the compliments. both front and rear are at 65". on the front i had the long side shortened 4.5", so i didnt have to move the spring at all. i converted both axles to 6 lug using the spyntec setup. on the rear there kit brings each side in about an 1 1/2".
 
Cool Rig

Could you post more shots of the details like the spare rig and the instrument panel? Merry Christmas
 
Back
Top Bottom