Muffler Help Needed - Bracket Broken

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 5, 2015
Threads
91
Messages
346
Location
South
Website
www.automobilefinds.com
I backed into a pole with my muffler took the brunt of it. It broke the bracket away from the rubber part. Any suggestions on what to do. The muffler seems solid with only surface rust.

It does seem to have pushed the rest of the exhaust forward about 1 1/2".

Should I just take it to a muffler shop? Or should I get a used bracket and then go to the muffler shop, or buy the whole part new and take it to a shop?

 
I have replaced the rubber gasket with a new one from Toyota. I have had the bracket welded at muffler shop. I have made my own rubber gasket from a hydraulic hose. The hydraulic hose will out last the OEM gasket as it steel reinforced. Drilled 4 holes in the hose, put in 4 small bolts and bolted it up to the bracket and hanger. Its more flexible and stronger than the solid rubber one. The hose is very hard to cut and drill with all the steel cords in it.
 
Good idea!
I have replaced the rubber gasket with a new one from Toyota. I have had the bracket welded at muffler shop. I have made my own rubber gasket from a hydraulic hose. The hydraulic hose will out last the OEM gasket as it steel reinforced. Drilled 4 holes in the hose, put in 4 small bolts and bolted it up to the bracket and hanger. Its more flexible and stronger than the solid rubber one. The hose is very hard to cut and drill with all the steel cords in it.
 
Back
Top Bottom