motor mounts?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 28, 2006
Threads
12
Messages
33
97 lx 450, 133k. it shifts kinda hard into drive, but then shifts smooth after that. accelerating from a stop or comming to a complete stop or speed bumps i get some movement from the shifter like somthins not bolted in all the way tight...any ideas?
 
Do you mean it's rough when shifter is moved from Park to Drive, or Reverse to Drive, or Drive to Reverse; but it's smooth shifting between gears? If that's the case, then I suspect the rear motor mount (aka tranny mount) is bad.

The shifter movements on rough road or bumps are completely normal.
 
park to drive, reverse to drive, and drive to reverse, but once in gear drives fine, how do i check if its bad?
 
Quickest check is to put it in low range. Have someone shift from N to D to N to R. If you have a bad motor mount the engine will attempt to leap out. Most times the left mount will go first as that's the forward torque side of the motor (maybe the right...I forgot), but replace them both.

When mine let go it was very obvious, but I have the 3FE torque monster under my bonnet.
 
Back
Top Bottom