Mod Day/Wrenching Session Sunday, September 1st

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

So who's still in for the mod/wrenching session this weekend? Even if your not doing any projects to your rig this time the help is certainly welcomed :cheers:

1. John- Bolt on Metal Tech sliders if delivered in time.
2. Jude - 100 series lift
3. Mike - Run wiring and switches for roof lights
4. Robert - Install lower link armor, install and wire reverse lights
5. Sean - ? look at rear locker, few small things on the 80
6. Larry - relocate winch solenoid under hood out of the weather, mount 10lb fire extinguisher tank for onboard air.
 
Last edited:
I have not hear anything from metal tech on when the sliders for John and I are going to ship. I call about my lift yesterday and cruiser parts said it should ship soon. Camel offroad is moving from the east coast to west I think that is holding up shipping.
 
:clap:
 
Still pretty quite, not much talk.

Volunteer said:
So who's still in for the mod/wrenching session this weekend? Even if your not doing any projects to your rig this time the help is certainly welcomed :cheers:

1. John- Bolt on Metal Tech sliders if delivered in time.
2. Jude - 100 series lift
3. Mike - Run wiring and switches for roof lights
4. Robert - Install lower link armor, install and wire reverse lights
5. Sean - ? look at rear locker, few small things on the 80
6. Larry - relocate winch solenoid under hood out of the weather, mount 10lb fire extinguisher tank for onboard air.
Click to expand...
 
Sure has been quiet lately, must be something to do with school starting, busy work schedules or football season kicking off :D. I'm looking forward to talking shop, doing some wrenching and hanging out Sunday. Cheers!

For those needing them for their projects please speak up for jacks, jack stands or any specific tool needs so we don't have 10 jacks and 20 jack stands and not the tools we're missing :)

I can bring an eclectic impact and air as well if needed?
 
My lift is not going to happen this weekend. I would like to get my winch electrical done and figure out what I need for my drive train.

What time you guys what to get started?

Things I have at shop
2 sets of jack stands, bottle jack, cheap trolley jack, electric impact no metric impact sockets, drills cordless and corded, limited sockets, air hoses and extension chords.
 
other than Robert don`t C a need for stand jacks etc mostly hand tools drill drill bits wiring & tools solder iron shrink tube loom tape terminals meter test light fans shade chairs hammock water food water :beer: :D
 
Ole Colony said:
My lift is not going to happen this weekend. I would like to get my winch electrical done and figure out what I need for my drive train.

What time you guys what to get started?

Things I have at shop
2 sets of jack stands, bottle jack, cheap trolley jack, electric impact no metric impact sockets, drills cordless and corded, limited sockets, air hoses and extension chords.
Click to expand...

Sorry to hear about the lift and sliders :(, I'll be there between 10 - 11 and will head there from church.
 
I wanna put my name in the hat. Not adding anything, just want to see if I can get my rear locker to engage and see what else needs to be done. Like to learn some more about my 80 so I don't feel so helpless trying to fix it.
 
I'm looking forward to this Sunday. It'll be a great time. I should be there around 0930 or so
 
Footwork said:
I wanna put my name in the hat. Not adding anything, just want to see if I can get my rear locker to engage and see what else needs to be done. Like to learn some more about my 80 so I don't feel so helpless trying to fix it.
Click to expand...

Sounds good bud, that's what our group is all about we're your technical support :) That and helping you spend your money on all the cool mods and stuff you need to go with them :D See you Sunday
 
Where y'all be at ... starting to get hot!!
 
You must log in or register to reply here.

Share this page

Back
Top Bottom