Missfire

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 21, 2004
Threads
55
Messages
381
Location
East Bay, CA
Hey...

Having some new problems with my '74 40 and hope someone out there can help out.

Cruzer's been running great, but recently started to missfire and stall. It starts up perfectly everytime but after a short time of running, starts to back fire and progressively run worse, and if I don't let it idle for a short time, it will stall.

If I do let it idle, it will run for another 50 yard then stall again!

Timing and plugs are fine. Not sure what would make it start up perfectly but stall after a period of running?

Anythought out there!

Thanks
 
Vapor lock possibly, and maybe a shorted plug wire or coil wire ? the starting fine then choking out or stalling when hot sounds like vapor lock to me. ? check to see if fuel lines are close to exhaust, and how old are your wires ? and or dist cap ? that also may be cracked ?

Just my .02 worth ..

Good luck ,,, :cheers:
 
thanks...

from what i've been reading, does sound like VL, though It seems that it should have problems starting up if that was the case. Gonna check on the fuel lines and see.

distributor and all the plug wires are 1 year old so that should not be the problem.

we'll see
 
The chances of it being vapor lock (fuel boiling in the line due to a hot fuel line) are slim to none.

Start by checking the fuel level in the carb bowl window when you start it and when it is running poorly.

Is it "backfiring" out the exhaust or spitting back through the carb?
 
It's probably running bad because it's homesick! You need to bring the thing back home!!! No, really, did the carb cooling fan work before you put the header on? You might need to install a switch for the fan if it proves to be V/L. The stock manifold must be closer to the sensor that cut's this fan on. Mine only works on very hot days since the header.

Later,
 
Back
Top Bottom