Mini Truck Axle ?'S

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 10, 2005
Threads
5
Messages
9
Location
ephrata, washington
I have a set of 83' or so mini truck axles i got when i purchased my 71' fj40. I am thinking of swaping them in place of the original axles. My question is this: the mini truck axles are SOA, do they come that wayfrom the factory? The SOA and the disc brakes are my reasoning behind swapping in the new axles. Any info, opinions, experiances, ect. would be appreciated. Here is a pic of the newer front axle.

Thanks
newaxle.webp
 
Yes.

This was covered in depth a while back. try the search feature.

IIRC, the minis are wider, not as strong as the LC, the spring perches are in the wrong place and the drag link/steering is wrong. Better option would be to use everything from the knuckles out (birfields, knuckles, rotors, calipers, spindles, wheel bearings, backing plates, steering arms and freewheeling hubs) on your LC axle. This is covered in the tech section with link below.

Many of the LC and heep vendors offer perches. I bought them through Proffit's and Quadratec. I have heard you can use Dodge perches but have no personal experience with them. The Quadratec's were cheapest at $26 or so for a set to the door.

http://www.ih8mud.com/techtrivia.php
http://www.toepper.net/Landcruiser pages/land_cruiser_how_tos.htm
http://www.ih8mud.com/tech/minidisc1.php
http://www.ih8mud.com/cruisertech.php
http://tinyurl.com/bxo4t
 
Last edited:
Back
Top Bottom