LX450 windshield wiper issues

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 29, 2006
Threads
1
Messages
12
Location
Oregon
Hey gang, we've been getting a lot of snow this year and my passenger side wiper keeps icing up on the outer tip. I noticed that the tip doesn't make contact with the glass when in the horizontal position. This is not a problem when it rains so I hadn't noticed it before. I've tried different blades to no avail.
It looks like if the arm was shorter the blade would avoid the curved outer part of the windshield and make full contact.

My question is, are the wiper arms different lengths on these rigs? I'm thinking of finding someone with a similar model and measuring.

I don't know if my windshield is original, could an aftermarket one have a weird shape that is hard for the blade to curve and make contact?
 
I'm using 18" for the front
 
My passenger wiper also skips the outside edge of the window. It also barely touches the top 2 as it sweeps. I've read posts that say the PIAA Super Silicone blade is better, but I haven't tried it. 18" blades are standard for both blades in front. I've run mixed blade sizes on some previous cars. So far I've only used RainX 18" on the Cruiser, and have not felt they needed replacing yet. (2 years old. Mostly parked in a garage.)
 
Thanks guys. I have tried different length blades on the PS but it seems like a shorter arm would move the blade towards the center and allow it to rest on the flat part of the windshield and not try to bend at the outer end.

Does anyone know if the wiper arms are the same from DS to PS maybe the wrong arm was installed.
 
Back
Top Bottom