LX450 newbie

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 15, 2007
Threads
3
Messages
35
Location
Danville,Ca
Hello I am new here. I have been looking for the right truck for a year now. I was looking for a land cruiser or lx450 with Factory lockers. I found a very clean 97 lx450 with 141k miles on it and lockers . The owner did not know that the truck had lockers. The only problem is that it need a new motor--rod knock.
My plans for the truck.

1st more power. I am going to start on the turbo kit in a few months. Right now I am buying all of the parts that I need. I have the intercooler and manifold right now.

2nd 2.5" lift with 285 tires

3rd we will see what hapens.

1026071703.jpg

lx450.jpg


My old trucks

Rubicon2.JPG

Rubicon.JPG

Top_Truckee.JPG

100_0220.JPG


My other hobie
Kauai_2006_014.jpg

MIke_Race_Car.jpg


Video of the rx7
YouTube - ls7 rx7 spin out ls1-rx7
Ls7 RX7 10.9@132mph on street tires ls1 - Video

Racing a fast Skyline 680AWHP Video truck was Mark's (GNX7) 1996 LX450
LS7 RX7 vs Skyline ls1 rx7 - Video
 
Last edited:
Welcome!:flipoff2:
keep us posted on the turbo progress.

good vid in your sig line, you smoked that guy.
 
Nice score on the LX450! Keep us updated on the turbo progress. That's the plan for mine in the future; I decided to go with the 2.5" lift and 285 tires and such first. :flipoff2: <--(official Mud salute)

LS7 FD. Oh my! :eek: I see it has just a wee bit of torque on tap. :grinpimp:

Welcome, and keep the shiny side up! :cheers:
 
Super nice truck - and a steal at $4k.

Why go with the used LX engine though if you want more power. If you're going through the trouble of swapping-in an engine anyway (and you are clearly experienced in that area ;)), why not go with something that will have even more power than the stock LX engine (even with the SC)?

Others hear on mud have done so with great results, and the current trend seems to be swapping in a Toyota V8 from the Tundra line - though a front clip from a diesel 80 can be had, and that would make for an awesome combination.

I'm not knocking your choices, just curious. You seem very experienced in the area of engine swaps and I will likely be making a decision at some point in the distant future so I'm looking for your reasoning.

Welcome to mud :flipoff2:
 
Super nice truck - and a steal at $4k.

Why go with the used LX engine though if you want more power. If you're going through the trouble of swapping-in an engine anyway (and you are clearly experienced in that area ;)), why not go with something that will have even more power than the stock LX engine (even with the SC)?

Others hear on mud have done so with great results, and the current trend seems to be swapping in a Toyota V8 from the Tundra line - though a front clip from a diesel 80 can be had, and that would make for an awesome combination.

I'm not knocking your choices, just curious. You seem very experienced in the area of engine swaps and I will likely be making a decision at some point in the distant future so I'm looking for your reasoning.

Welcome to mud :flipoff2:
 
Damn good deal!

To think someone recently tried to sell a dead-motored LX450 here for $10,000!

Even if your new investment ends up costing you $7,000 (including the $4000 for the truck) you're laughing.

Good call on the 2nd gen 4Runner. Second best wheeler ever.

You'll have to post your comparisons between wheeling your 'Zuk and the Lexus. Should be some slight differences....
 
My Sami was alot of fun, I took it on alot of trips. The Sami would go anywhere. My 4runner was a nice truck I took it on alot of trails in Colorado. It needed a SAS bad. I wanted to have a very nice rig that would be able to offroad better than the 4runner. This is why I was looking for a land cruiser. I now have children so I need something larger than the samurai but still fun.


Motor swap-- I thought about puting in a 5.3 or a ls1 into the truck. I have done alot of engine swaps over the years. I realy like the Toyota 4.5 engine, it just needs a 75-100hp boost. It is a very smooth motor. I decided to keep the stock motor and add a turbo.

I am going to change the head gasket and bolts on my new motor before I put it in. I found the head gasket kit but no one sales the bolts with the kit. do I have to buy the bolts from Toyota? Or should I use ARP bolts?

Thanks

Mike
 
Motor swap-- I thought about puting in a 5.3 or a ls1 into the truck. I have done alot of engine swaps over the years. I realy like the Toyota 4.5 engine, it just needs a 75-100hp boost. It is a very smooth motor. I decided to keep the stock motor and add a turbo.

This is my exact reasoning for wanting to turbo the 1FZ. It's tough, smooth, reliable, and it's already there. Do it up nice, and post lots of pics. :)

I am going to change the head gasket and bolts on my new motor before I put it in. I found the head gasket kit but no one sales the bolts with the kit. do I have to buy the bolts from Toyota? Or should I use ARP bolts?

I don't know what your long term power goals are, but my eventual plan is to go with a new OEM head gasket w/ ARP studs. (I'm also considering O-ringing the block, though I'm not sure it's necessary). Stock bolts are available through cruiserdan here on the forums. If you want to go with studs, I believe the ARP kit for a 2JZ-GTE Supra engine is a direct fit for the 1FZ.

Better yet, I tell ya what.. you need a new engine anyway, so why not contact the owner of Supercrown and buy his setup? :grinpimp:

(He's also the guy you'll want to ask about the 2JZ head stud kit).
 
BTW..

Check out what I just found :eek:

See page 52 (of the PDF, pg 41 of the catalog), PN S92574 pictured at the very bottom. Looks like us 1FZ guys have MLS gasket options as well! :cheers:

Here's the link: http://www.scegaskets.com/pdf/SCE Catalog.pdf
 
Last edited:
Back
Top Bottom